here's a quick guide of how to spray the glove
box handle.. same follows for the the other parts
Removing the glovebox is easy, just open it
and you will see the 3 screws
Keep them safe
So this is what you'll need
Sand paper, Primer, Colour spray, lacquer, smaller
masking tape,
larger tape, Scissors.
First thing you gotta do is sand down the handle
then mask it up with the smaller masking tape
When you've done this your going to need to
apply the larger masking tape like shown in the pic below
Now your going to need a nice area, so spray
doesnt get everywhere
Newspaper is ideal
Next step is to apply the sprays, firstly the
primer with around 2-3 layers every 10-15
minutes, then i left it for a couple of hours,
allthough 24 hours is the recommended amount.
Do the same with the colour spray and the lacquer.
And here's your results
Same applies for all parts
box handle.. same follows for the the other parts
Removing the glovebox is easy, just open it
and you will see the 3 screws
Keep them safe
So this is what you'll need
Sand paper, Primer, Colour spray, lacquer, smaller
masking tape,
larger tape, Scissors.
First thing you gotta do is sand down the handle
then mask it up with the smaller masking tape
When you've done this your going to need to
apply the larger masking tape like shown in the pic below
Now your going to need a nice area, so spray
doesnt get everywhere
Newspaper is ideal Next step is to apply the sprays, firstly the
primer with around 2-3 layers every 10-15
minutes, then i left it for a couple of hours,
allthough 24 hours is the recommended amount.
Do the same with the colour spray and the lacquer.
And here's your results
Same applies for all parts
