My Exhaust... Magnex

  1. Regular Poster Joined: Sep 2007 Essex Posts: 286 Citroen Saxo 1.6 VTS
    #1
    I think sticks out abit far for my liking. About an inch back would look sooooo much better, are there companys out there that will take an Inch off my exhaust so it sits nicer next to my bumper?

    Just a thought
  2. Saxperience Post Whore Joined: Feb 2005 St Andrews United Kingdom (Scotland) Posts: 7384 Green mk1 vtr/s and Focus zetec
    #2
    Easy DIY job, 2 bolts to unbolt the clamp then pull the mounts off the rubbers, then hacksaw an inch or so off the pipe and refit it. Job done.
  3. Super Moderator Joined: Mar 2003 Durham (England) Posts: 37932 1. AX 2. Mk2 Saxo VTR 3. MK4 R32 DBP
    #3
    all i did was to take my standard exhaust and sue that as a template on where to cut, just use a grinder mate, ten minute job at the most, you will need some exhaust putty to seal it up too
  4. Regular Poster Joined: Sep 2007 Essex Posts: 286 Citroen Saxo 1.6 VTS
    #4
    Quote:
    Originally Posted by Sean View Post
    Easy DIY job, 2 bolts to unbolt the clamp then pull the mounts off the rubbers, then hacksaw an inch or so off the pipe and refit it. Job done.
    Off the Backbox where it connects to the mid section?

    Cheers guys
  5. Saxperience Forum Bum Joined: Jul 2005 Builth Wells Posts: 2757 Rs172 106 XSI
    #5
    off the end of the centre section you want to cut a bit off
  6. Regular Poster Joined: Aug 2007 Havant, nr Portsmouth Posts: 406 Red 97 vts bought in june 2012 :)
    #6
    Quote:
    Originally Posted by harding1985 View Post
    Off the Backbox where it connects to the mid section?

    Cheers guys
    Dont cut the backbox!!
    cut the center pipe

    oppss marc already said that..

    goodluck..
  7. Super Moderator Joined: Mar 2003 Durham (England) Posts: 37932 1. AX 2. Mk2 Saxo VTR 3. MK4 R32 DBP
    #7
    yes the centre pipe mate but wouldnt really matter if you were getting it welded up