406 brakes on vts

1. vtsrich L-plater Joined: Feb 2008 Posts: 57

   #1 10th March 2008, 16:53

   will 283 406 brakes off an R reg fit on to my vts with 15 inch rims thanks rich
2. Paul_Collins Established Member Joined: Apr 2006 Bridgend, S. Wales Posts: 1092 MkII White VTS

   #2 10th March 2008, 17:00

   if you mean the brembos then yes, depends on the wheels, standard vts wheels need 20mm spacers.
   
   I have speedline chronos and i needed 3mm spacers.
3. vtsrich L-plater Joined: Feb 2008 Posts: 57

   #3 10th March 2008, 17:29

   no not the brembo just the 2.0 16v
4. vtsrich L-plater Joined: Feb 2008 Posts: 57

   #4 10th March 2008, 21:40

   any one dun this
5. The_Notorious_C_A_T Established Member Joined: May 2007 Near Inverurie (kind of...) Posts: 2303 Twingo Silverstone

   #5 10th March 2008, 22:26

   Quote:

   Originally Posted by Paul_Collins if you mean the brembos then yes, depends on the wheels, standard vts wheels need 20mm spacers. I have speedline chronos and i needed 3mm spacers.

   any idea if the turinis will need? as I think they're the same offset, was just hoping hte spoke design might help on the turinis?
   
   if not did you get hub centric spacers?
6. johnnyg_vts Established Member Joined: Dec 2006 Fleetwood Posts: 2244 2002 Saxo VTS

   #6 11th March 2008, 08:19

   i am 95% sure these brakes will not fit - i had a set from a 406 hdi, 260(ish)mm and they didnt fit. the caliper wouldnt line up on my saxo hub.
7. vtsrich L-plater Joined: Feb 2008 Posts: 57

   #7 11th March 2008, 21:49

   iv dun a bit of serchin and if there bosh calipers they fit but if there lucas they wont