HELP!!! dashboard removal

  1. Frequent Poster Joined: Jan 2007 Shrewsbury Posts: 642 Saxo VTS
    #1
    I need help quickly. I am in the middle of removing my dash from my vts. Ive undone all the bolts inc. the 1s under the scuttle panel. It wants to come out the passenger side but something is holding it in on the drivers side.!!! Any ideas?? Is there another bolt that i cant see holding it in near the bottom?

    It seems to be on the side rather than the bulkhead.
  2. Frequent Poster Joined: Jan 2007 Shrewsbury Posts: 642 Saxo VTS
    #2
    does the steering column need to be removed?
  3. Saxperience Forum Bum Joined: Jul 2006 paignton Posts: 3168 saxo
    #3
    theres a bar undo it from the steering column and in the bottom on the center of the dash
  4. Frequent Poster Joined: Jan 2007 Shrewsbury Posts: 642 Saxo VTS
    #4
    thanks mate, have a rep. Literally i read that, went and undid it & it basically fell out. lol!!

    Anyway, back 2 it!
  5. Established Member Joined: Jul 2006 Clevedon Posts: 2255
    #5
    if you were a premium member you would of been able to use the guides
  6. Saxperience Post Whore Joined: May 2006 Stockport, Manchester Posts: 5911 Vtr @ 123bhp R.I.P VTS
    #6
    Stick some pictures up were all the bolts are mate
  7. Saxperience Forum Bum Joined: Jul 2006 paignton Posts: 3168 saxo
    #7
    il have a dig as i think i might have some pics of the bolts
  8. Frequent Poster Joined: Jan 2007 Shrewsbury Posts: 642 Saxo VTS
    #8
    there are 3 bolts under the scuttle panel, take off the heater control part. Remove the steering wheel & clocks. There are 2 bolts, 1 either side of the dast on the sides. Then 1 underneath the dash in the middle, (not the big bolt holding the bar in) Then finally the bolt on the right hand side of the steering column part.