Any idea what make this is??? **FOUND OUT**

  1. #1
    hey fellas, when i bought my saxo it already had a 4-2-1 manifold on it but i have no idea what make it is!! could someone possibly let me no by these pictures, they are not the best but can get some better ones if needed!!




    Thanks!
  2. #2
    Either supersprint or raceland id say.

    Hard to tell unless you compare them directly.
  3. #3
    looks like my old one, that was a supersprint matey
  4. #4
    Whatever make it is, get it heat wraped
  5. #5
    janspeed- janspeed make alot of 4-2-1s in that blacky colour
  6. #6
    What does heatwrap actually do, apart from the obvious (keeping the heat fromt he engine bay!) and is it possible to wrap it while its on the car and how do you secure it??

    and finaly, would you say its worth keeping or gettin a new one??
  7. #7
    Heat wrap keeps the hot gasses in the exhaust and stops them fron escaping, hence making the gasses flow quicker and more efficiently. Not only does it do this, it keeps down engine bay temperatures.

    The manifold looks good, so i wouldnt bother taking it off. Not unless you were taking it off to wrap it, cus i think you might struggle to wrap it in situ, but you could give it go. You get little wire clips that hold the wrap on tightly.

    You can get em on ebay for cheap!
  8. #8
    Ahh right, cheers for that mate ill look into it! would rep you for that but wont let me, got go spread some else where first lol
  9. #9
    this stuff any good???

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ksid=p3907.m29

    OR would this one be better?

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ksid=p3907.m29

    And when your wrapping it, how many times should you go round etc??
  10. #10
    Quote:
    Originally Posted by Saxo_89 View Post
    this stuff any good???

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ksid=p3907.m29

    OR would this one be better?

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ksid=p3907.m29

    And when your wrapping it, how many times should you go round etc??
    thicker one would probably be easier. mind that heat wrapping manifolds can make them crack...
  11. #11
    definately ruling out the raceland as there chromed
  12. #12
    PRED - have you seen what happens to a manifold when its used?

  13. #13
    no for obvious reasons

    but im sure the racelands dont look like that even when they have been used, they go more like a rainbow effect, that one pictured doesnt look to go like that looks more like a supersprint to me thats all
  14. #14
    Looks like supersprint mate!!..
  15. #15
    Could be race land or supersprint!!..
  16. #16
    To maybe help people out a little if you look at the first picture you can see what is like a metal tube coming from one of the manifolds exit pipes (2nd in from the left) not sure what its for at all but duno what other manifolds have this....
  17. #17
    If it a supersprint there should be a small plate welded onto the side of the pipes with the supersprint logo and text.
  18. #18
    It looks like a Supersprint to be honest. If you look closely it has bolts welded on to mount the heat shield. Like Stormin said there should also be a Supersprint tag welded onto the pipe on the far left, there is also one welded on the pipe on the far right. Infact if you look carefully at the picture i think you can just see one of the welds that holds the tag on the right hand pipe.

    Tim
  19. #19
    i think some one on hear had there manifold wrapped and it actually saved there lives cant rember who but i think it may have been a buckingham blue saxo?

  20. #20
    seanp06
  21. #21
    Quote:
    Originally Posted by stormin View Post
    If it a supersprint there should be a small plate welded onto the side of the pipes with the supersprint logo and text.
    Quote:
    Originally Posted by Tim_W View Post
    It looks like a Supersprint to be honest. If you look closely it has bolts welded on to mount the heat shield. Like Stormin said there should also be a Supersprint tag welded onto the pipe on the far left, there is also one welded on the pipe on the far right. Infact if you look carefully at the picture i think you can just see one of the welds that holds the tag on the right hand pipe.

    Tim
    Ill take a peek for these supersprint logos! pissing down at the mo so ill give it a miss today lol!

    have not noticed anything before though!

    and is that what that small pipe coming out of one of the branches is for, to secure a heatsheild???

    And what is this about it saving someones life!
  22. #22
    yea had an oil fire but the heat wrap ment it didnt just engulf the whole car
    i think thats right
    i remember reading about it the other month
  23. #23
    oh heck! a trip to e-gay for some heatwrap might be on the cards i think!
  24. #24
    well the mystery is over! checked down the side of the manifold and there it is,

    SUPERSPRINT!!!

    Cheers for thehelp guys!
  25. #25
    Right got a question how many times do you wrap it around the manifold?

    is it just a single layer of the stuff?

    also how many rolls would you need.. would the 5m rolls be ok?

    Best place to buy it?
  26. #26
    my advice to you is to create your own thread and ask there,

    1, you will get more replys
    2, you wont get neg rep from me for being a tit and asking in my thread!
    and
    3, read the rules of sax-p and use the search button before asking

    Good luck