de-wipering

  1. #1
    hey guys, i've had a search through for the answers i need but couldn't find any..

    i know i can get the 21/22mm from halfords, and i know the item codes for ordering it from pug, but can you get the washer and screw/nut from halfords as well, or b&q? if you can what are the actualy sizes i need?

    cheers people..
  2. #2
    what do you need a washer and a nut for?
  3. #3
    just said in the guide that i need them... dont i?
  4. #4
    Quote:
    Originally Posted by mason001 View Post
    just said in the guide that i need them... dont i?
    you dont need them...

    all you need is the washer from Halfords...got mine done other week and only used the washer...

    i had to saw off the arm as mine wouldnt come off...even with a little WD40 added...
  5. #5
    Quote:
    Originally Posted by Raz View Post
    you dont need them...

    all you need is the washer from Halfords...got mine done other week and only used the washer...

    i had to saw off the arm as mine wouldnt come off...even with a little WD40 added...
    Had to do the same as you too still yet to go get another arm.

    Go to Halfrauds and get the grommit set, hole filled, problem solved.
  6. #6
    Quote:
    Originally Posted by Peejous View Post
    Had to do the same as you too still yet to go get another arm.

    Go to Halfrauds and get the grommit set, hole filled, problem solved.
    cba with the motor...so just going to bin it lol or might get another arm and replace it for the autum/winter
  7. #7
    nice one people.. cheers!
  8. #8
    i think the washer and nut is only for Pug's but im not sure
    and apparently there's a grommet under the carpet in the boot or something which you can use but i couldnt find it so i just went bought some
    only £1.49 so its not much
  9. #9
    PM predator_vtr as he wrote the guide. Im not sure why they are nedded tbh
  10. #10
    as said the washer nut and cap/cover are the pug part codes

    but if your just using a grommet just plug the hole
  11. #11
    is it the same for the 205?
  12. #12
    could be mate, not sure but tbh de wipering the rear of any car will be easy
  13. #13
    Like WilsonSaxo said mate, there is the correct part under your boot carpet.

    Just open the boot.. pull up the plastic pins closest to the back seats (one left, one right) and lift the whole thing up, and pull it back.

    In the middle, there is a rubbery gromit the size of a 10p piece (even pull the sound deadening back, it's on the bare metal).. that's a perfect fit..

    Saves you a trip a halfords, and saves you the money too.. and takes about 20 seconds
  14. #14
    Can i ask what size grommet is used to plug the rear washer jet hole, or did most people simply leave it in?
  15. #15
    Left my washer jet in, If you remove it you'll obviously need to block the washer pipe.

    Hole will probably be around an 8mm (at a guess).
  16. #16
    9mm one.
  17. #17
    dunt know about saxos.. but on the floor of a 106 going horizontaly is a raised bar.. and in it is a grommet... loads of people use this to fill the hole on the window
  18. #18
    Quote:
    Originally Posted by Agent-VIP View Post
    Like WilsonSaxo said mate, there is the correct part under your boot carpet.

    Just open the boot.. pull up the plastic pins closest to the back seats (one left, one right) and lift the whole thing up, and pull it back.

    In the middle, there is a rubbery gromit the size of a 10p piece (even pull the sound deadening back, it's on the bare metal).. that's a perfect fit..

    Saves you a trip a halfords, and saves you the money too.. and takes about 20 seconds
    As above ^^^