can anyone tell me how i can flush my engine. i looked at my coolant 2day n it had formed a kind of white skin ontop of the coolant and water level. i wana flush the engine to freshen it up. but my mate took my haynes manual n ahs gone on holiday. so can anyone tell me how this can be done please?
flushin the engine?
-
#1
-
#2right
here we go...
radiator
1. Open The Drain Plug And Draing All The Water.
2. Disconnect The Top And Bottom Radiator Hoses.
3. Put A Hose Pipe Into The Top Hose And Wait TillClean Water Emerges From The Bottom Hose
Via Radiator.
4. Connect All Hoses
5. Fill With Water And Antifreeze Mix Using A Header Tank On The Expansion Tank.
6. Bleed System And Check For Leaks.
engine
1. Disconnect The Top And Bottom Radiator Hoses.
2. Remove Thermostat And Replace The Housing.
3. Put A Hose Pipe Into The Top Hose And Wait Till Clean Water Emerges From The Bottom Hose
Via Engine
4. Replace The Thermostat
5. Connect All Hoses
6. Fill With Water And Antifreeze Mix Using A Header Tank On The Expansion Tank.
7. Bleed System And Check For Leaks.
bleeding
There Are 3 Need To Be Done In Sequence Starting With The Lowest.
Open All Bleeding Points Up Until A Steady Supply Of Water Emerges without Bubbles.
Bleed Points Are:
1. Top Right Of The Radiator(Small Plastic Clip)
2. Top Of Thermostast Housing (5mm Allen Key, Just Right Of The Rocker Cover)
3. Drivers Side Of Engine, Looks Like A valve cap.
Make Sure To Use A PROPPER Header Tank On Top Of The Expansion Tank To Prevent Air Locks!
hope that helps mate
-
#3great guide there adam

-
#4i can stil feel the pain from ur 1st attempt adam mate!
remember to use A PROPER HEADER TANK! NOT A DANG 1/2 BOTTLE! ARRRRRRGH
-
#5cheers 4 that mate, just wot i needed. gona get started on it 2moro, seemin as i alredy have the right tools
-
#6white skin? sounds like your head gaskets on its way out very known symptom that, thought u guys wud point that out to him
-
#7so wud dat be a major problem and an expensive one?
-
#8not really
-
#9cud u give me an estimate price?cuz im gona need to get it done in da next 2 weeks before i go on holiday so when i do cum bak i can sell da car off staright away
-
#10it might not be headgasket, is the car over heating? Loss of water or oil? loss of performance? Chances are its just a bit of scum thats collected in the cooling system and formed a bit of skin
-
#11condensation possibly getting in somewhere.
For example , if you've got an aftermarket air filter, water may slightly be getting in at the breather. Clean it up a bit and keep an eye on it. -
#12well the cars not over heating or no loss of power or leaking anything? could be that its collected sumtin thru the air filter, i've flushed the engine 2day so right now the cars running gud. i'll see if the skins forms agen
-
#13ShucksQuote:Originally Posted by Scottgreat guide there adam
