vts/vtr beam and shocks on a ax gt

1. Thunderbird L-plater Joined: Mar 2007 stanford-le-hope Essex Posts: 38 2003 vtr, 1991 ax gt

   #1 15th July 2008, 18:30

   iv got a ax gt and im wanting convert it to 4 stud hubs and discs on the rear so i was wondering if any1 knows if the rear beam and front susp legs from a vtr/vts would bolt on with out any major problems, and also the top mounts on the ax shocks are 2 stud so would i be able take the 3 stud top mounts off the saxo shocks and use the 2 stud ax mounts on them? any help would be appreciated
2. user_14759 Saxperience Addict Joined: Mar 2007 Cheltenham Posts: 11412 Megane 03 1.6 VVTi Dynamique

   #2 15th July 2008, 18:44

   No...
   
   I have an AX beam and struts at work.
   
   Not sure the stud fitting though (wheel stud)
3. Quick Saxperience Post Whore Joined: Mar 2003 United Kingdom (England) Posts: 7064

   #3 15th July 2008, 19:42

   Try http://www.axoc.co.uk/phpBB2/
4. snottybadger Frequent Poster Joined: May 2008 Cumbria Posts: 526 2000 VTS

   #4 15th July 2008, 20:25

   The rear beam will fit, I put a VTR beam complete with discs on the back of my AX GTi.
   
   It is slighty wider though, had a little scrubage with 15" wheels.
   
   Not sure about the fronts though...
5. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

   #5 15th July 2008, 23:04

   Im currently doing this too to my AX.
   
   Got hold of a fully VTS front and rear brake/suspension setup which im refurbishing before fitting.
   
   My intention too is to use the AX 2 stud top mounts instead of the 3stud ones combined with the rest of the setup.
   
   Cant see why there would be any problems as fundamentally the chassis is the same. Any changes should just be cosmetics.