Seat Ibiza Spiltter

5th July 2005, 01:32

im thinkin bout gettin a defuser soon, ive heard bout it b4 n just wonderin is it the ibiza splitter that people put on as a defuser? has anyone got any pics of one n no how much one would cost? cheers

5th July 2005, 01:44

yeh check out alex's saxo in the for sale section mate

5th July 2005, 02:02

yeah seen it mate, wasnt sure if that was one, anyone know the prices? alex told me it was 90, wud it b cheaper from a seat dealer? n is it a spiltter from an ibiza? so they all have them on?

6th July 2005, 01:24

no dont think alex's is an ibiza one.

have a look in the styling section as there are a few in there.

6th July 2005, 01:30

ibiza spiltter is £ 31.73 from barlow motors w'ton. part number 6k0805903e. put one i mine i will pm you pics done on phone so not brill see what you think.

6th July 2005, 18:30

ah ok mate cheers!

6th July 2005, 20:59

seat splitter-

6th July 2005, 21:02

thats the one i got for £31.

7th July 2005, 03:01

yes , they are around £30 from Seat dealers for those. Although they do involve a fair bit of modding to fit the rear bumper of a saxo.
Lots of chopping and rivetting in place.
My one is an RGM one, specific for the saxo. So exact fit.

7th July 2005, 03:01

nice and simple mod, very sublte imo

7th July 2005, 05:19

looks great on that saxo with the euro style

7th July 2005, 17:45

any idea how much a body shop would charge to fit?

7th July 2005, 17:51

you can do it yourself mate. line the middle of the splitter up with the middle of the bumper then screw it on with self-tapping screws. then work out towards the edges and trim off the excess at the ends. you'll have to bend it as you go, to make it sit snugly on the saxo bumper. pm greensaxo, he has one on his bumper.

7th July 2005, 17:56

yeah im not to comfident doin that, wot do u screw it into? n how long screws? how do i carv the bit for the exhaust? the one above looks like hes bent the bit down on the spiltter so its underneath the exhaust

7th July 2005, 18:59

you screw it to the little lip on the underside of the bumper. once you actually look at it, it will make sense. buy 10mm self tappers. to cut it, use a stanley knife, you could even heat it up with a lighter etc to make it easier to cut.
once you have it trial-fitted, mark the bits at the end which need cutting, take it off, cut it to size, then re-fit it. job done.

7th July 2005, 22:33

yeah to cut the section for the exhaust just cut a section out like the one in the pic, hacksaw or jig saw will be ok.

7th July 2005, 23:00

hmm i think il have ago at it, il have to see, normally good with hands off stuff so can only see, but wot i was tryin to say with that picture, it looks like the top of the splitter is bend underneath the exhust so it looks asif it goes round if u get me, how do i do that?

7th July 2005, 23:04

think its just cut out mate.