kent cam

1. user_21524 Established Member Joined: Feb 2008 wirral Posts: 2087 saxo vtr mk2

   #1 18th August 2008, 21:41

   http://cgi.ebay.co.uk/kent-cam-piper...d=p3286.c0.m14
   
   will this fit a mk2 02 vtr engine says its to fit roller type but im unsure and will i require a remap with these cams?
2. leeds106 Established Member Joined: May 2006 Posts: 1108 16v Citroen AX

   #2 19th August 2008, 06:12

   dunno why the guy aint fitting it cos it will fit his s2 rallye
   
   
   its a very mild cam so no remap would be needed
3. user_21524 Established Member Joined: Feb 2008 wirral Posts: 2087 saxo vtr mk2

   #3 19th August 2008, 16:49

   cheers mate what bhp increase would i be lookin at?
4. phillyc Regular Poster Joined: Feb 2008 torquay (devon) Posts: 269 saxo 02 vtr straight through exhaust

   #4 19th August 2008, 18:38

   I was lookin at these cams. I asked him if they fit the mk2 and he said he finks so.
   does any1 know for sure if they are the roller type
5. leeds106 Established Member Joined: May 2006 Posts: 1108 16v Citroen AX

   #5 20th August 2008, 06:50

   check the cam code on the kent cam site and see what its for although im pretty sure its for roller rockers
6. kbracing L-plater Joined: Oct 2007 Brentwood Posts: 74 Saxo VTr

   #6 26th August 2008, 23:21

   Be careful as i ordered the wrong cam for my vtr (ordered to not roller cam type)
   
   The engine ran but did not tick over i had to restrip the head and put the right cam in
   Runs well with the standard ecu but looking to install an Emerald to gain the max from this
   
   P.S. i know of 2 other guys that got the wrong cams one other kent but also a piper
   
   If you want a non roller black top cam i have one for sale
   
   PM me
   
   Keith
7. kbracing L-plater Joined: Oct 2007 Brentwood Posts: 74 Saxo VTr

   #7 26th August 2008, 23:24

   Be careful as i ordered the wrong cam for my vtr (ordered the non roller cam type)
   
   The engine ran but did not tick over i had to restrip the head and put the right cam in
   Runs well with the standard ecu but looking to install an Emerald to gain the max from this
   
   P.S. i know of 2 other guys that got the wrong cams one other kent but also a piper
   
   If you want a non roller black top cam i have one for sale
   
   PM me
   
   Keith