0 offset wheels

1. webby Established Member Joined: Jul 2007 manchester Posts: 2456

   #1 26th October 2008, 16:34

   does any body know if they will fit a saxo or a 306 with spacers or whatever?
   
   if they will fit one and not the other it makes the decsion of which one to buy easier.
   
   oh yeah 7x15 on the front and 8 or 9x15 on the rear.
2. Toad Saxperience Post Whore Joined: Mar 2007 Reading Posts: 8980 French tin can

   #2 26th October 2008, 16:38

   If you mean that the ET is 0, then the wheels will actually protrude, so you won't want spacers! Saxo suggested ET is around 15 IIRC. The higher the ET, the closer to the hub.
3. webby Established Member Joined: Jul 2007 manchester Posts: 2456

   #3 26th October 2008, 16:53

   yeah the et is 0 both front and rear.
   
   will they fit?
4. Toad Saxperience Post Whore Joined: Mar 2007 Reading Posts: 8980 French tin can

   #4 26th October 2008, 16:58

   Well, yes, but they will stick out! The stud pattern is the more important bit. You need a PDC of 108.
5. webby Established Member Joined: Jul 2007 manchester Posts: 2456

   #5 26th October 2008, 17:00

   yeah there off a mk2 escort rally car 4x108 et0
6. Toad Saxperience Post Whore Joined: Mar 2007 Reading Posts: 8980 French tin can

   #6 26th October 2008, 17:10

   Quote:

   Originally Posted by webby yeah there off a mk2 escort rally car 4x108 et0

   Hmm, well the stud diameter is fine. It might not mirror up to your hub perfectly, but they should go on OK. BUT, they will stick out... You might need to modify your arches.
7. ally-vts Frequent Poster Joined: Oct 2008 Republic Of Linwood.. Posts: 855 green phase 1 vts

   #7 27th October 2008, 11:01

   a bit of poke never hurt anyone stretch some tyres on them and your laughing