Rear Beam Re-build Query

1. Mark51p Super Moderator Joined: Sep 2006 Wakefield Posts: 14427 Golf GT

   #1 18th February 2009, 21:34

   My rear wheels have an odd camber atm. I recently changed the drivers side rear wheel baring, when doing this it became apparent that i had some groove marks on my stub pin (not good). The passenger side also has them but they are not as bad.
   
   So im thinking of getting another beam and rebuilding it, but need to know 100% what to do first.
   
   Cheers to Steve_vts for the pics
   
   
   
   from what i understand the things that are cirlced in black just slide onto the pins as that what has the barings in, correct?
   Are the yellow and red circled parts seperate?
   can i buy the red cirlced parts seperatly?
   
   
   
   
   how would i get the red cirlced part off once i got the green circled part off?
   
   might seem very random using the colours but this way there should hopefully be less confusion as some people use different names for different parts
   
   thanks in advance
2. williamsvts Saxperience Post Whore Joined: Feb 2006 northumberland Posts: 7693 pulsar gtir, mk4 astra sxi

   #2 18th February 2009, 21:40

   parts in the red will press out, took me 60ton to get mine out.
   red, yellow and black are all seperate parts.
   if the stub pins are marked both will need replaced. you cant buy them from shops or dealers so best is to get some made up.
   think jpsaxo has some made up to sell though. and you'll also need a bearing kit from citroen.
3. williamsvts Saxperience Post Whore Joined: Feb 2006 northumberland Posts: 7693 pulsar gtir, mk4 astra sxi

   #3 18th February 2009, 21:45

   this is how i pressed mine out
   
   
   
   drilled hole through fucked pin, the put bar down the middle and pressed it out like that.
4. Mark51p Super Moderator Joined: Sep 2006 Wakefield Posts: 14427 Golf GT

   #4 19th February 2009, 09:13

   ^^ wheres the press in that picture?
5. williamsvts Saxperience Post Whore Joined: Feb 2006 northumberland Posts: 7693 pulsar gtir, mk4 astra sxi

   #5 19th February 2009, 21:39

   its not in the picture.
6. Steve Saxperience Hardcore! Joined: Mar 2005 Newcastle Upon Tyne Posts: 19910 CW Honda Integra DC5

   #6 20th February 2009, 10:07

   am going to try what beasty dide and hammer them out lmao
   what was the "shim" you fucked on yours marc?
   
   you know how we said we could swap the pins over? how exactly can i do that if i have to drill a hole through the fucker??
7. jpsaxo Saxperience Post Whore Joined: Oct 2005 Sydney Posts: 8525 Mango Westcoast

   #7 20th February 2009, 10:26

   Yes we sell the pins, or we can do you a completely refurbed beam mate! PM my brother westieSP if your interested mate.
8. Mark51p Super Moderator Joined: Sep 2006 Wakefield Posts: 14427 Golf GT

   #8 20th February 2009, 10:28

   what would you charge for the pins JP?