some one please work this out because i cant!

  1. #1
    driving back home the other night and all of a sudden sounded like the coilpack was playing up and running on three and then all of a suden stopped
    and there was no way of starting it agen, so waited for a toe home and in the moring tock the rocker off and the cam cuver just to check the cam belt was still tight and that i hadnt dropet a valve of anything and everything was fine, so i decide to check comprison and all was fine wile i was doing tht i checket for spark and all was good,put it all back together and went to turn it over and now only the flywheel is turning!
    the cam belt is still tight and its nt like the bottem end would of gone because the engine wasnt underload as it wasnt running,
    please can some one help me as i dont even no were to start
    key ways or flywheel?gearbox out?
    and whn u turn it over and the fly wheel turns these no grinding noese or anything to say tht sumthink is in the way, some one help im soo confused!
  2. #2
    crank sensor?

    if its turning over and not firing, which it sounds like then that could be it.
  3. #3
    sounds like the crank sensor
  4. #4
    its a vtr and its just the fly turning the crank is nt nor is the cam or anything
  5. #5
    Are the cams spinning? If not then i would try the flywheel sensor. If they are its something else. When i did my conversion i had a similar problem. It turned out to be an earth. If you have a jump lead, put one end on the front engine mount eye and the other end on the negative pole on the battery. Then turn it over. If it starts its your earth behind the battery. Just give it clean with some wire wool or sand paper. If not PM me what youve already tried and ill give you some more options. Im the problem solving king lol, i had fucking loads of issues!!
  6. #6
    Quote:
    Originally Posted by ocktovts View Post
    sounds like the crank sensor
    Seriously craig, if i asked you to even show me what a crank sensor is your head would explode. SHUT UP!! Go and fit your window tints!!!