cold air feed and induction kit

1. user_32637 Regular Poster Joined: Mar 2009 Bridgnorth, Shropshire Posts: 267 Saxo VTR MK2

   #1 6th April 2009, 12:52

   When I get my pipercross induction kit will I be able to fit a cold air feed to it?
   
   considering its just a standard pipercross kit like this
   http://www.potn.co.uk/p1547169.htm
2. werdna Frequent Poster Joined: Mar 2009 Leeds Posts: 680 Ep3 Type R

   #2 6th April 2009, 12:55

   You can run a cold air feed to any filter.
   
   Obviously it wont be the same as a closed induction kit though.
3. phil-jones Frequent Poster Joined: Dec 2008 lancaster Posts: 736 mk3 seat ibiza 1.4s

   #3 6th April 2009, 12:59

   yo dont bolt it on just point the cold air feed towards the air filter
4. user_32637 Regular Poster Joined: Mar 2009 Bridgnorth, Shropshire Posts: 267 Saxo VTR MK2

   #4 6th April 2009, 13:04

   oh ryt kk cheers
   do you think theres any point in getting the cold air feed?
5. phil-jones Frequent Poster Joined: Dec 2008 lancaster Posts: 736 mk3 seat ibiza 1.4s

   #5 6th April 2009, 13:41

   yes definatly otherwise you will get heatsoak and loose hp
6. user_32637 Regular Poster Joined: Mar 2009 Bridgnorth, Shropshire Posts: 267 Saxo VTR MK2

   #6 6th April 2009, 15:48

   cool is it easy enough to position underneath the bonnet then?
7. bonesvtr Frequent Poster Joined: Mar 2009 Otley, west yorks, soon to be Aberdeen Posts: 523 2000 VTR - Sold 1994 Pajero off roader 1995 VR6

   #7 6th April 2009, 16:15

   yes mate, ive got two on mine, go one going from the behind the mesh in the front bumper on the passenger side behind the pas pump up into the engine bay and the standard one thats been extended slightly to get as much cold air as i can to the filter
   ________
   R2
8. user_32637 Regular Poster Joined: Mar 2009 Bridgnorth, Shropshire Posts: 267 Saxo VTR MK2

   #8 6th April 2009, 16:29

   Quote:

   Originally Posted by bonesvtr yes mate, ive got two on mine, go one going from the behind the mesh in the front bumper on the passenger side behind the pas pump up into the engine bay and the standard one thats been extended slightly to get as much cold air as i can to the filter

   
   how have you held the pipes in place?
9. bonesvtr Frequent Poster Joined: Mar 2009 Otley, west yorks, soon to be Aberdeen Posts: 523 2000 VTR - Sold 1994 Pajero off roader 1995 VR6

   #9 6th April 2009, 16:38

   ty'raps to the old mounting bracket for the standard airbox, and ty'raps at various points alont the length of the pipe.
   ________
   Milf Xxx
10. user_32637 Regular Poster Joined: Mar 2009 Bridgnorth, Shropshire Posts: 267 Saxo VTR MK2

    #10 6th April 2009, 16:43

    cheers guys