ARB swap - advice please

1. col101 Frequent Poster Joined: Mar 2009 York Posts: 768 VTR

   #1 6th April 2009, 22:48

   I need to remove an anti-roll bar from my old axle and put it into my new axle... (it's a long story)
   Both axles are off the car (I also have a third axle... don't ask!), so is it as simple as it looks?
   
   Remove plastic cap, remove 13mm bolt, remove end cap and the arb will pull out?
   
   (pic stolen from williamvts - hope you don't mind)
2. Noddy Saxperience Forum Bum Joined: Mar 2007 Maidstone, Kent Posts: 4121 Mk2 Posi Blue 1.1

   #2 7th April 2009, 00:55

   Basically yes, you will need to use a slide hammer to remove it though

   1 user thanked this post: col101
3. AlexBp West Midlands Joined: Dec 2007 West mids Posts: 23149 Supra,civic GL

   #3 7th April 2009, 01:00

   yea its pretty simple tbh
   just pull the plate off and you can push the arb out of the beam

   1 user thanked this post: col101
4. col101 Frequent Poster Joined: Mar 2009 York Posts: 768 VTR

   #4 7th April 2009, 06:56

   Cheers guys
5. Citsport Regular Poster Joined: Jan 2009 Newcastle Posts: 396 Diablo Red 106 GTi

   #5 7th April 2009, 12:01

   I think if you use an M8 bolt it will screw into the end and push the antiroll bar out the other end.
6. Steve Saxperience Hardcore! Joined: Mar 2005 Newcastle Upon Tyne Posts: 19910 CW Honda Integra DC5

   #6 7th April 2009, 12:12

   
   
   Easiest way to get the arb out.
   
   In that photo where you took the nylon plug out.
   Take your top damper bolt out of one of your re shocks and screw it into where you took the nylon plug out.
   
   Keep going then wheny you go around the other side, you will see your arb is out.
   
   Saves buying side hammers and shite

   1 user thanked this post: col101
7. andywiddss1 Saxperience Post Whore Joined: Nov 2007 skipton northyorks Posts: 5275 clio 172 exclusive track toy

   #7 7th April 2009, 12:57

   Quote:

   Originally Posted by Steve_VTS Easiest way to get the arb out. In that photo where you took the nylon plug out. Take your top damper bolt out of one of your re shocks and screw it into where you took the nylon plug out. Keep going then wheny you go around the other side, you will see your arb is out. Saves buying side hammers and shite

   yep thats the way to do it