De-Wiper help

  1. #1
    i tried to dewiper my saxo 2 day but i coulg get the rear wiper off, any tips??
  2. #2
    undo the nuts on the motor mate also undo the nut on the wiper pm me if you need more help mate
  3. #3
    Pretty sure the Mark 2 ones are bonded on as well as bolted.. You can either get one of them wiper pully things or take a hack saw to it.
  4. #4
    mine wasnt bonded
  5. #5
    mine was stuck on good but not bonded, me and ben did mine today, used pull tool came off no problems, recommend that rather than a hacksaw
  6. #6
    where did u get the pull tool from
  7. #7
    dont stupidly try and use leverage with a spanner, not clever (goes to remove the last of the glass shards from his hands) it can go terribly wrong
  8. #8
    halfords, i tried a 2 arm one but a 3 arm one worked better and well agree with above, a few people have tried yanking it about and smashed windows not worth replacing window for the sake of a few extra quid
  9. #9
    how much you pay for it??? will take a trip 2 moz
  10. #10
    no idea mate, got them long time ago, a few people say buy one use it then take it back. i'm sure u could pick one up and a cheapy diy place
  11. #11
    Sledge hammer?
  12. #12
    it should just pull off but they use some annoying nut that like expands when its done up so it makes it very difficult to remove the wiper. i ended up just hack sawing mine off in the end because i didnt want to shatter my window from pulling on it to hard.
  13. #13
    Quote:
    Originally Posted by GoochyBoy View Post
    Sledge hammer?
    lol gooch
  14. #14
    its ok i bought a ball joint puller from halfords and used that, was easy enough and then i used the grommet under the boot lining to seal the hole, thanks for help
  15. #15
    yeah if it doesnt come off first time hit it with a hammer lol
  16. #16
    take the inside cover off the boot, undo the bolts holdin it from the inside, undo the bolt holdin the wiper arm on, then i cut the plastic nut off cos it was bein a twat to undo, then js fell out
  17. #17
    Hack saw.
  18. #18
    i sawed the wiper arm really close to the bolt. sawed it about half way down and tightened the nut as far as it would go untill the pressure snapped the part of the arm i sawed. took a few minutes
  19. #19
    comment 14 ses its done so all these ideas really arent helpin at all