Fitting mk2 spoiler

5th June 2009, 09:47

I am fitting a mk2 spoiler but the flat part to bond it goes on the glass but I've been told you can't bond onto glass, what should I do?
How did you do yours?
I'm using sikaflex by the way

5th June 2009, 10:24

i pressume you can do. many people have stuck them on, just make sure you leave it to set properly before taking the holding tape off.

5th June 2009, 11:44

Get a mk2 VT rear window as it has holes for the spoiler to bolt through.

5th June 2009, 11:54

i done this .. get sum tiger seal mate get it off ebay not that expensive.. and wait for a dry day .. alot of people on here have done the same and it works .. no need to drill ... stick a decent amout on both ends and use sum masking tape to hold it on .. make sure u apply alot of pressure while sticking .. should be done in about an hour ..

5th June 2009, 13:24

Quote:

Originally Posted by Nuve

i done this .. get sum tiger seal mate get it off ebay not that expensive.. and wait for a dry day .. alot of people on here have done the same and it works .. no need to drill ... stick a decent amout on both ends and use sum masking tape to hold it on .. make sure u apply alot of pressure while sticking .. should be done in about an hour ..

Thanks mate, I'm going to get it done this weekend, will post up some pics

5th June 2009, 14:36

nice one .. makes a hell of a lot of difference to the look of the car

6th June 2009, 15:29

tiger sealed mine on, £8 ebay. get a bit of the black shit on either end, press it firmly on the glass in the right position and get someone to gaffa tape it on for a few hours