Yeah I got some. You will have to take the grill off. And there is 3 mounting positions on the light unit.
The one on the bottom is a pain to get to because your socket won't nicely sit on the bolt.
I found on mine it was a pain to get them lined up properly and fit flush with the wing.
Wiring is dead easy. Just unplug your standard 3 pin block and plug into your new lights. The halos are easy but require abit of thought. Cut off your sidelight bulb and strip the wire. Get some block connectors from Halfords or somewhere and attach to the GREEN and RED wire you stripped. Then get the wires for the Halos. Mine were white and black but basically black was negative and white was positive. Strip the BLACK wires back and twist together. And place into the block connector on the GREEN side. And do the same with the WHITES ( if that is what colour you have ) and place into the RED side of the block connector. You could connect them any way you want but this enables you to take them out if needed.
Hope this helps you.
