Important! : coil pack wireing

1. seanmcd Newbie Joined: Jul 2009 buckie Posts: 2 1998 vtr white

   #1 21st July 2009, 19:25

   hi all please help me!! does any one know which pin on my 1998 vtr coil pack should be live when i 1st turn the key?? some dosey T#T ripped off the plug for the coil pach now i have no idea which way round the 3 grey wires should be! please some one help me
2. BobCm Forum Section Moderator Joined: Apr 2009 Orpington Posts: 1406 My son drives a Poseidon Blue Saxo Mk2 1.6i VTR.

   #2 21st July 2009, 20:57

   Hi,
   
   Coil pack wiring:
   
   Start with pin 4 that should have a short wire with a black block on it connected to earth - it is a capacitor for shunting radio interference to earth which may be one of the coil pack securing bolts.
   Pin 3 - "1126" comes from the fuel injection relay pin 1; it will have 12V when the ignition is on and the fuel injection relay operates.
   Pins 2 & 1 go to the ECU and are the primary windings of the coil pack
   Pin 2 - "111" wire number
   Pin 1 - "110" wire number
3. seanmcd Newbie Joined: Jul 2009 buckie Posts: 2 1998 vtr white

   #3 22nd July 2009, 06:39

   thank you so much i hope it works ill try it later
4. user_43898 Established Member Joined: May 2010 leicester Posts: 1446 Clio 182 Inferno

   #4 10th April 2012, 14:54

   huge bump lol, anybody know whether the pins 1 and 2 are earth or not, need to connect an omex rev limiter to x2 negative wires on the coils, there are only 4 wires.
   pin 4= supressor/earth
   pin 3= 12v from fuel injection relay
   Anyone know what pins 1 and 2 are thanks
5. JHolden94 Newbie Joined: Oct 2012 Shrewsbury Posts: 14 C2 by Loeb

   #5 23rd November 2012, 23:16

   Quote:

   Originally Posted by SnakeVTR huge bump lol, anybody know whether the pins 1 and 2 are earth or not, need to connect an omex rev limiter to x2 negative wires on the coils, there are only 4 wires. pin 4= supressor/earth pin 3= 12v from fuel injection relay Anyone know what pins 1 and 2 are thanks

   Bumpp did you get this sorted buddyy? Need help to get mine working on a 1.1 spi.
6. TeleTor1 Newbie Joined: Jan 2010 Bergen Norway Posts: 5 Saxo VTS 2000 VW Passat 2008

   #6 14th March 2014, 05:46

   I have a 200 Saxo VTS and have an issue with no sparks. I have looked at this post and found the txt below and i have no 12V on pin 3? Coulcd it be the ECU or knock sensor causing no 12V on pin 3?
   
   *Pin 3 - "1126" comes from the fuel injection relay pin 1; it will have 12V when the ignition is on and the fuel injection relay operates.
   Pins 2 & 1 go to the ECU and are the primary windings of the coil pack
   Pin 2 - "111" wire number
   Pin 1 - "110" wire number