ive got my mot next month and just been doing all the little bits to make sure it goes through and i went out for a drive and started hearing a loud knocking when turning and don't have any idea of what it is could any1 help?
loud knocking
-
#1
-
#2check your driveshaft if its when turning the gaitor may have burst already
-
#3yeah its probably your cv joint, the gaitor (rubber cover) may have split and lost the oil, making the clicking/knocking noise
-
#4If its the CV joint, you cant get them on their own - you will need the entire driveshaft, but they are not expensive, about £60 or thereabouts. Once the gaiter splits or comes off, the cv joint ingests all grit and crap from off the roads and the bearings get destroyed very quickly - re-greasing them wont help once you can hear the joint knocking on turning.
-
#5kk thanks guys ill jack it up and have a look tomorrow
-
#6Sounds like you c.v joint bud!!
-
#7ive had a quick look as i didnt have much time and theres no leaks do u think it jst needs some grease?
-
#8probably not, did you see if the rubbers still looked in good condition?
-
#11id just change the shaft rather than playing about with gaiters have you checked you ball joints in your wish bones?
-
#13hiya mate i had a similar problem like this it was only wheni was turning left mind, i was my front suspension arms they were worn so it could be them my rear axle was also goosed.
-
#14well i had a mechanic look at it where i gonna get it motd and he says its comming from up high and he can't quiet work out what it is but it will pass mot with some adviseries
-
#15Quote:well i had a mechanic look at it where i gonna get it motd and he says its comming from up high and he can't quiet work out what it is but it will pass mot with some adviseries
have you checked the big nut on you strut top the nut in the cup which bolts the damper? -
#17if its a knocking it might be your suspensions/ wishbones, if the bushes have worn, as you turn a corner the play in the joints will probs be creating the 'knocking noise' its as the bushes arnt holding the sus' arm strong enough and in effect are rattling around. this is the problem with mine and i plan on doing the work soon. however i though i would check here to see if any one has ever done this job before. if so come across and problems???
i know its a fair simple job but you know. . . .
i had the same prob tho i first changed the driveshafts, which was half the knocking noise, but once i did that i could hear another sound, this happens to be my front sus arms. just got em today, £34 each.
cheers
