........

1. 23carragold Saxperience Forum Bum Joined: Apr 2009 Posts: 4861

   #1 17th September 2009, 20:48

   ............
2. stu-n-shell Saxperience Forum Bum Joined: Feb 2007 Perth Posts: 4798 posi blue desire vt lookalike

   #2 17th September 2009, 20:53

   well i folded it round like a door skin before i put the vt kit on but i was a panel beater. best way is get an angle grinder and just grind it off then prime and paint the bare metal.
3. MiniGibbo Saxperience Hardcore! Joined: Apr 2007 Bournemouth Posts: 15289 '04 VW Transporter.

   #3 17th September 2009, 21:01

   If you go onto driftworks they have very detailed write ups on diy rolling.
   
   Was the way i got my 17 et13 rears onto my coupe designed for 17 et37
   
   
4. user_10473 Saxperience Forum Bum Joined: Jun 2006 Swansea Posts: 4946 Bianca White Peugeot 106 S2 Rallye, Saxo VTS

   #4 17th September 2009, 21:05

   Just trim it off with a grinder, or, bend the lip up out of the way.
   
   Don't need to roll the arch.
5. 23carragold Saxperience Forum Bum Joined: Apr 2009 Posts: 4861

   #5 17th September 2009, 21:31

   ............
6. user_10473 Saxperience Forum Bum Joined: Jun 2006 Swansea Posts: 4946 Bianca White Peugeot 106 S2 Rallye, Saxo VTS

   #6 17th September 2009, 21:36

   Yes, a pliers will do it. Just be careful you don't distor the arch and that you don't crack any paint from the panel. Any paint that cracks on the lip make sure you treat it to prevent any rust forming.
   
   When I did mine, I cut one clean off with a grinder and I cut slits into the other one abotu an inch and a half apart and then bent each sections up out of the way.
   
   Both worked a treat.
7. 23carragold Saxperience Forum Bum Joined: Apr 2009 Posts: 4861

   #7 17th September 2009, 22:15

   ...........
8. gavbey Frequent Poster Joined: Mar 2007 perth Posts: 811 cammed saxo vts

   #8 18th September 2009, 14:36

   put a small scafolding pole inbetween the arch and wheel and role the car lol
   
   i watched it on you tube OHKAYY HAHAHAH
9. dimitri Infrequent Poster Joined: Jan 2006 United Kingdom (England) Posts: 102

   #9 21st September 2009, 01:07

   grinder and hammer just spray it after to stop it rusting
10. ally-vts Frequent Poster Joined: Oct 2008 Republic Of Linwood.. Posts: 855 green phase 1 vts

    #10 21st September 2009, 12:12

    baseball bat, drive forward and jam the bat between the tyre and the arch TA DA!!