Aftermarket Gauge to OEM Oil Pressure Switch

  1. #1
    Can I wire up an after market electronic oil pressure gauge to the original oil pressure switch on the 16v?

    I thought I would be able to but the gauge has 3 connections and the sender only 1.
  2. #2
    Quote:
    Originally Posted by Ste View Post
    Can I wire up an after market electronic oil pressure gauge to the original oil pressure switch on the 16v?

    I thought I would be able to but the gauge has 3 connections and the sender only 1.
    3 wires to go to the sensor? Surely one earth, one switched live, and one signal?
    1 user thanked this post:
  3. #3
    No, the pressure switch in the block has a single wire to it. The gauge has 3, its a TIM gauge labelled S,G,I next to each connection on the back. So im guessing Signal, Ground and urrrrrm I..... lol
  4. #4
    Yeh, I'd try and tap into the oil pressure sensor, and see what readings you get on the gauge.

    I = ignition ?
    1 user thanked this post:
  5. #5
    Maybe mate, muchos gracias. Time to go frazzle some more wiring
  6. #6
    yes the gauge will need ground and a live feed to work, and the other wire will be for the singal,

    so you need to find a good earthing point, and then wire it to a live point to give it power, and then the other wrie should do to the pressure switch wire,

    Andy
  7. #7
    Quote:
    Originally Posted by Ste View Post
    Maybe mate, muchos gracias. Time to go frazzle some more wiring
    lol, good luck!! Let me know how it goes as I plan on fitting one of these at some point