wideband lc1

1. user_9396 Established Member Joined: Apr 2006 torquay (England) Posts: 1993 supercharged vts. 1.1 saxo. accord type r

   #1 15th October 2009, 00:26

   need help with wiring this into a vts with pred ecu, anyone know what wires go where
   cheers
2. Bcup L-plater Joined: Aug 2009 Lisbon-Portugal Posts: 34 Citroen Saxo 1.6 16V

   #2 15th October 2009, 09:25

   Here is the explanation that Andy give to me:
   
   
   if you remove the standard narrowband sensor, you will see there are 4 wires, 2 white, 1 grey and a black.
   
   If you look at the cable, and call BLACK=1, GREY=2, then next white wire=3 and the end white wire=4...
   
   Wire 1 black goes to LC-1 brown
   Wire 2 grey goes NOWHERE- cut it off
   Wire 3 goes to Blue, white and the black wire on the LED
   Wire 4 goes to the LC-1 RED wire.
   
   The LED red wire goes to LC-1 black.
   
   The little terminator plug on the box goes to the "IN" plug on the LC-1