Driveshafts

1. SaxoJay1409 Frequent Poster Joined: Mar 2009 Rotherham Posts: 589 Saxo mk2 furio vts conversion

   #1 24th October 2009, 20:24

   i have a west coast and the drivers driveshaft is knocking when i turn left , well i thinks its the driveshaft anyway , but i have a VTR for spares that is lowered and was thinkin of using the driveshafts off that but changing the complete sus leg as well is this an easy or hard job as i have no idea , any comments would be appreciated thanks
2. Predator_R32p Super Moderator Joined: Mar 2003 Durham (England) Posts: 37932 1. AX 2. Mk2 Saxo VTR 3. MK4 R32 DBP

   #2 24th October 2009, 20:34

   You may be best buying a haynes manual if your going to do it
3. TU-Tuning Saxperience Hardcore! Joined: May 2006 Bristol Posts: 16575 JP4urio, 306 DTurbo SportShed

   #3 24th October 2009, 20:34

   Yeah easy enough mate, once the pinch bolts undone and the wishbones brought down and out along with the shaft, all you need to remove is the droplink, the brake hoses and undo the topmount from above and the whole lot with come out with a bit of slight persuasion. Then just swap the brakes across and your sorted.
4. megslad Regular Poster Joined: Feb 2009 Llanrwst Posts: 320 VTS mk2 Blue (Track) VTR mk2 Gold Y107BCW

   #4 25th October 2009, 20:20

   easy if you know what your doing mechanically
5. user_35417 Infrequent Poster Joined: Jul 2009 Luton Posts: 232 Mauritius Blue VTR & K5 Gixxer 6

   #5 25th October 2009, 21:03

   they're pretty straight forward took me 15-20mins for the inner considering I'd never done them on a saxo before.