2001 Saxo Vtr

  1. #1
    Hi guys..

    Been scanning over this forum and the net trying to find a step by step guide to fitting a saxo vtr air filter i havent done it before so just looking for the help.

    Does anyone know where i could view a tutorial or help us out?

    Thanks
  2. #2
    Hi scotty,

    A guide is being drafted but will cover the 16v VTS.

    The Mk1 VTR is covered in the Haynes manual. The Mk2 is very similar to the Mk1 in the steps you need to foloow but it has a differently shaped air filter box.

    If you follow the thin breather pipe from the top right hand corner of your rocker cover it will connect to the air filter box.

    Here is a Mk2 VTR:

    The thin breather pipe has a yellow band at the air filter box. You'll need to unclip it. Then remove the air filter box jubilee clip from the throttle body then twist the air filter box to undo the screws and reveal the filter.
  3. #3
    what air filter is a perfect fit for the saxo vtr? Just a little cheapish one

    Just looking for sound really... And do i buy that will have a bit for the breather pipe to connect to?