FAO unmapped cammed VTS owners!

1. user_16990 Frequent Poster Joined: Jul 2007 Posts: 810 2001 VTS

   #1 30th October 2009, 10:09

   Hi.
   
   Looking to get some Newman PH3's sometime very soon and am curious as to what sort of timing people are running their unmapped VTS's on with regards to decent power and running on the stock ECU map?
   
   Inlet and Exhaust cam timings if you will please
   
   (Remap/Pred in a few months btw. Just need a temporary setup!)
   
   Cheers.
2. user_15516 Saxperience Post Whore Joined: Apr 2007 Posts: 6640 Integra DC5R & VTS

   #2 30th October 2009, 12:13

   Set them to standard timing initially, then have them setup by a reputable tuner with rolling road facilities imo. Although I've read the idle can be improved slightly by retarding the exhaust cam a couple of degrees?
3. gouldy87 Saxperience Forum Bum Joined: Jun 2008 Posts: 3932

   #3 30th October 2009, 18:52

   you set them up for peak power and they will run fine, just sound "lumpy"
   
   newmans = 110 degrees on both cams
   
   im not sure on cat cams tbh but they will have the installation instructions with them and will specify.
   
   if you want a more smoother idle id recommend setting the exhaust cam at 110 and the inlet at 112 degrees

   1 user thanked this post: user_16990
4. user_16990 Frequent Poster Joined: Jul 2007 Posts: 810 2001 VTS

   #4 30th October 2009, 21:32

   Awesome. Thanks buddy. I will have a play when I get them but wanted a rough idea what to aim for before fitting them so that's helpful info.
   
   Cheers.
5. user_10176 Saxperience Post Whore Joined: Jun 2006 Ramsey st marys, peterborough Posts: 8288 Saxo's, Corsa (Daily)

   #5 31st October 2009, 08:55

   dont go too mad, playing around with them, i set my newman cams when unmapped to stock on the exhaust, and retarded the inlet cam about 1-2 degrees,
   
   thanks
   
   andy