25mm spacers

1. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

   #1 1st November 2009, 14:02

   if anyone knows of some 25mm spacers going, just need 2 of them for my saxo let me no, i went to wheels uk and £90 was there cheapest for 2, ive had some links off ebay but im not getting them just yet so they might be gone by the time i do go back on. Cheers. X
2. rushy_23 Saxperience Hardcore! Joined: Aug 2004 West Mids Posts: 15392 '98 EK9 N1

   #2 1st November 2009, 14:08

   There are some on Ebay that are 20mm for much less. They are the ones that bolt to the hub, then you bolt the wheel to the spacer.
   
   Cant remember the name of the seller. They unfortunatly dont do 25mm.
3. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

   #3 1st November 2009, 14:10

   I have already got 20mm on! i need bigger ones for my back, my fronts are fine! Thats why im after 25's xx
4. rushy_23 Saxperience Hardcore! Joined: Aug 2004 West Mids Posts: 15392 '98 EK9 N1

   #4 1st November 2009, 14:15

   http://www.modifiedcarstore.co.uk/p1035339.htm
5. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

   #5 1st November 2009, 14:17

   thanks but there more expensive then the ones i have on at the minute lol plus i only need 2 xx
6. Winny Infrequent Poster Joined: Jun 2009 Driffield, East Yorkshire Posts: 194

   #6 1st November 2009, 19:18

   I bought these to fit 8J Keskins (ET -15) on the rear, I wouldn't advise anything less tbh.
   
   When using a wheel spacer or adapter you run into the problem of taking the center load off of the bearing and moving it to the out side of the bearing. You want to look for a spacer that is "hubcentric" so that you dont place the bearing load onto the lugs.
   
   Just to be clear, the cheap-o spacers (the kind that you have sandwiched between your wheel and axle using the existing wheel studs) are in fact pretty dangerous. These cheap-o spacers leave little thread for your lug nuts to hold onto and can fail.
7. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

   #7 2nd November 2009, 16:55

   oh right that's not good then is is. Yeah someone else has sent me a link similar to them. Getting pretty dangerous though as my wheel is so close to the back of the Trojan bar (i think it is) it has been rubbing as i have been driving, not major but getting there well disappointed that is why i need bigger spacers to bring it out more. X
8. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

   #8 2nd November 2009, 17:40

   Sal the link for the ones that i sent you are hubcentric to saxo hubs so they are absolutely fine. The measurement is there aswel on the link
9. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

   #9 2nd November 2009, 17:43

   http://cgi.ebay.co.uk/25mm-Wheel-Spa...item19b70e67f7
   
   here's the link again if you've lost it, its a company that sells them so should have frequent stock for you to buy whenever you're ready
   
   There are better spacers out there, but again they will be alot more expensive
   
   These are perfectly fine for your day to day use of the car

   1 user thanked this post: Sal
10. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

    #10 2nd November 2009, 17:46

    Right willsy they are perfect as long as they sell them all the time ill be able to get them in a months time wont i? X
11. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

    #11 2nd November 2009, 17:50

    yeah you should be able to no problem Sal send them a message on ebay if you can to double check
12. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

    #12 2nd November 2009, 17:51

    ok i'll try lol.. i don't go on ebay that much but i'll have a look. i went on the other day actually and found a well good "i love my saxo" sticker lol!! i no i have 3000 problems with the car but.. that maybe would help what ya think haha!
13. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

    #13 2nd November 2009, 17:59

    lol gotta have a few personal touches havn't u
    
    Have you found any more bits that you need doing?
14. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

    #14 2nd November 2009, 17:59

    Erm everything i told you and Lee, that was it the whole hour's list worth haha! sorry about that x
15. Psycho18 Established Member Joined: Apr 2008 west Mids Posts: 1775 Mk1 White VTS

    #15 2nd November 2009, 18:04

    has anyone tried those spacers with vts or vtr alloys?
16. Phsyco_Paff Established Member Joined: Mar 2009 South East Posts: 2015 Phase 2 vts

    #16 2nd November 2009, 18:24

    Give rimstyle a shout they should do them cheaper than 90 i got 4 hubcentric in 20mm for 80 quid
17. user_33164 Infrequent Poster Joined: Apr 2009 Posts: 245 16v ax s2 rsturbo 406hdi

    #17 3rd November 2009, 20:52

    i need to get some hubcentric spacers for the ax as i have problems holding on to the stering wheel lol
18. saxohull Infrequent Poster Joined: Sep 2009 Hull Posts: 169 S1 106 Xsi running 148whp

    #18 3rd November 2009, 20:55

    i have some 20mm sparco if you still need some, boxed and unused
19. Sal Regular Poster Joined: Apr 2009 Nuneaton Posts: 455 Citroen Saxo 1.4 Furio

    #19 4th November 2009, 15:34

    nah its ok i need 25mm thanks anyway x
20. rushy_23 Saxperience Hardcore! Joined: Aug 2004 West Mids Posts: 15392 '98 EK9 N1

    #20 5th November 2009, 18:22

    Quote:

    Originally Posted by Sal thanks but there more expensive then the ones i have on at the minute lol plus i only need 2 xx

    That was for a four individual spacers. Sorry forgot you needed just 2.
21. user_32035 Frequent Poster Joined: Mar 2009 Walsall Posts: 534 Megane Coupe F7R, Fiesta Rs, Corsa Sri, Sax Vts

    #21 5th November 2009, 19:05

    Quote:

    Originally Posted by Sal nah its ok i need 25mm thanks anyway x

    i have 4 kei 25mm spacers 108 hubcentric ones, and M12 X 1.25 bolts to go with them
    http://www.potn.co.uk/p1035339.htm thats the kit i have. i want 70 pound delivered for them
    
    The only problem is is i won't split, so i suppose you could buy the 4 then sell the other 2 your self. bargain for 60 pound
    
    http://i727.photobucket.com/albums/w...4102009093.jpg