brembo 4 pot braided lines?

1. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

   #1 23rd January 2010, 17:30

   hi, i was asking on here a wile ago about what i needed to run 4 pots on my vtr. i no have everything. i boutgh the calipers disks and pads as a kit. the calipers came with braided lines but they are a bit short on my vtr.
   
   their was someone on here that could do me some braided brake lines but i cant remember who. anyone have any idea?
   
   cheers
2. Add91289 Established Member Joined: Aug 2008 In The Peak District Posts: 2348 Icelandic VT?

   #2 23rd January 2010, 17:34

   i think kam racing dose them
3. 3cott Saxperience Forum Bum Joined: Mar 2008 Rotherham Posts: 4614 Black mk2 vts

   #3 23rd January 2010, 19:49

   Quote:

   Originally Posted by sexoturbs hi, i was asking on here a wile ago about what i needed to run 4 pots on my vtr. i no have everything. i boutgh the calipers disks and pads as a kit. the calipers came with braided lines but they are a bit short on my vtr. their was someone on here that could do me some braided brake lines but i cant remember who. anyone have any idea? cheers

   Swampy
4. Chico999 Saxperience Forum Bum Joined: Sep 2007 Dunfermline Posts: 2814 2000 Wicked Red VTS

   #4 23rd January 2010, 19:50

   Quote:

   Originally Posted by 3cott Swapy

   swampy
5. user_16747 Banned Joined: Jul 2007 Posts: 4328

   #5 23rd January 2010, 20:14

   Yes that would be me
   correct length lines
   correct banjo ends
   correct bolts and washers
   all at a very good price
6. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

   #6 24th January 2010, 09:48

   how much would you do that set up for mate? i have a mk1 vtr if that makes any difference. i no the clip that hold the lines are different so may need a bit longer.
7. user_16747 Banned Joined: Jul 2007 Posts: 4328

   #7 30th January 2010, 12:28

   dude read your pm
   
   any way a few pics
   
   
   
   
   these are the new style makers tags and im one of the few who have items with them on at present.
   they dont make the lines any better but they do look better than the old style
8. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

   #8 4th February 2010, 11:38

   i recieved my lines many thanks mate. the loop and bolt part that fits to the caliper is diferent on the new lined to the old ones.. the old ones was just straight on. thats how its prob suposed to be but ill try fit them later today
   
   now about the master cylinder.. i have been told on here to use a gti6 master cylinder when running these brakes to make them fell a bit better. is the master cylinder where the brake fluid bottle is? it has the fluis bottle then a bit underneath it?
9. Sneakydevil89 Saxperience Forum Bum Joined: Apr 2008 Exeter Posts: 4738 Seat Ibiza 1.9 TDi

   #9 4th February 2010, 11:55

   MC is the bit that goes into the brake servo (bit black round thing on passenger side) and the bit the brake fluid resevoir sits on.
   
   iirc VTR's have 4 port MC do they not? (4 lines coming out of the MC)
   
   if so, i think gti6 are only 2 port. Therefore you'll need to source one that has 4 ports.
   
   If yours is 2 port then make sure you get the right gti6 MC as i know someone how bought one which was supposidly from a gti6 but the ports for the brake lines were on the wrong side, which just makes more unneccesary work.
   
   hope that helps
10. user_16747 Banned Joined: Jul 2007 Posts: 4328

    #10 4th February 2010, 12:21

    The lines will fit fine.
    Some calipers have a cross over tube on them that uses a standerd male fitting.
    This pipe can be removed and the lines you have fit direct to the caliper.
11. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

    #11 4th February 2010, 15:25

    Quote:

    Originally Posted by swampy The lines will fit fine. Some calipers have a cross over tube on them that uses a standerd male fitting. This pipe can be removed and the lines you have fit direct to the caliper.

    ok cheers ill let you know how i get on
12. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

    #12 4th February 2010, 15:30

    is the mc expensive? i was looking at this on ebay ( http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT )
    
    ok i will double check how many ports mine has before i buy. if mine is a 4 port any ideas what i could do?
    
    someone said my pedal might be stiff if i dont change this.
13. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

    #13 9th February 2010, 18:30

    i have just read on another forum that the 406 hdi non abs mc would be best to use when doing the 4p0t brake conversion. it is a 4 port one so saves alot of trouble rather than fitting it to the gti6 2 port. if that is any halp to anyone.
    
    i will be trying one out at the end of this month
14. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

    #14 29th January 2014, 14:33

    Hi, I bought a set of braided lines off you a long long time ago for a set of brembo calipers to fit my saxo vtr... Do u no if the braided lines will fit a pug 106 as I am selling them? And if you are still doing them could I get some new bolts and washers for the caliper side of the lines.
    
    Thanks
    
    Sent from my HTC One mini using Tapatalk
15. Alfie09 Frequent Poster Joined: Feb 2013 Posts: 579

    #15 29th January 2014, 17:19

    Saxo and 106 lines are different length, can't remember which way around it is.
    Think 106 are longer.
    
    Don't think he will reply , but you can get the bolts and washers from eBay cheap enough
16. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

    #16 29th January 2014, 18:06

    if you just need banjo bolts then torques.co.uk probably have them.
17. sexoturbs Established Member Joined: Jan 2009 luton Posts: 1013 saxo vtr turbo

    #17 29th January 2014, 19:23

    Quote:

    Originally Posted by welshpug if you just need banjo bolts then torques.co.uk probably have them.

    Cheers bud had no idea what they was called
    
    Sent from my HTC One mini using Tapatalk