3 bolts on drivers driveshaft

1. saxo_mike Established Member Joined: Mar 2008 Heald Green, Stockport Posts: 1721 black/yellow vtr

   #1 19th February 2010, 14:53

   i've got 2 undone i can see underneath, but where the hell is the 3rd
2. ashleyoneill Frequent Poster Joined: Oct 2005 Chippenham, Wiltshire Posts: 796 Mk2 Wicked Red VTS

   #2 19th February 2010, 15:06

   Do you mean the intermediate bearing? There is no bolts on the actual driveshafts themselves.
   
   1) Intermediate bearing has two lug ended bolts that need to be rotated.
   2) Driveshaft needs to be removed from the hub end after removing the big nut on the end of the draveshaft
   3) Withdraw driveshaft.
3. saxo_mike Established Member Joined: Mar 2008 Heald Green, Stockport Posts: 1721 black/yellow vtr

   #3 19th February 2010, 15:16

   got them 2 out and it still won't pull free
4. ashleyoneill Frequent Poster Joined: Oct 2005 Chippenham, Wiltshire Posts: 796 Mk2 Wicked Red VTS

   #4 19th February 2010, 15:18

   try harder its just tight in there. I had to use a ball joint splitter on mine to leaver the bearing carrier against the driveshaft to get it out!!
5. user_32900 North West Joined: Apr 2009 Warrington, Cheshire Posts: 5733 PH2 Peugeot 106 "race" car - Currently in pieces

   #5 19th February 2010, 15:21

   your not undoing the whole bracket for the bearing housing are you, that has 3 bolts on. you only want to be undoing the two lug ended bolts and it should pull out. let me know if your really stuck. I'll nip round.
6. user_10473 Saxperience Forum Bum Joined: Jun 2006 Swansea Posts: 4946 Bianca White Peugeot 106 S2 Rallye, Saxo VTS

   #6 20th February 2010, 05:37

   As above. Loosen and twist the lug end bolts out the way. There are only.
   
   I used a collection of cold chisels to slowly ease the bearing from the housing. Tight as fook!