Induction Kit

1. Lexxi Infrequent Poster Joined: Sep 2009 West Sussex Posts: 162 Saxo VTR '00

   #1 1st March 2010, 13:39

   As i was fitting my induction kit, i was fiddling about with the breather i think, and i snapped it.. now im looking to get a new one and possibly a longer one, because my piper-x induction kiit doesn't fit well so i've added a pipe and the breather doesn't reach the kit, is it possible to get a logner one?
2. Lexxi Infrequent Poster Joined: Sep 2009 West Sussex Posts: 162 Saxo VTR '00

   #2 1st March 2010, 13:42

   i'll take a picture in 15 minutes to see what i mean properly if i got the part wrong
3. Lexxi Infrequent Poster Joined: Sep 2009 West Sussex Posts: 162 Saxo VTR '00

   #3 1st March 2010, 13:56

   
4. Lexxi Infrequent Poster Joined: Sep 2009 West Sussex Posts: 162 Saxo VTR '00

   #4 1st March 2010, 13:56

   as you can see, that part is snapped, and the pipe on the right side doesn't reach the induction kit, any ideas? haha
5. taitypot106 Frequent Poster Joined: Jun 2009 tyne and wear Posts: 567 saxo 1.1i desire

   #5 1st March 2010, 14:48

   http://cgi.ebay.co.uk/NEW-Breather-F...item3ef94be496
   
   something like that for the bit that doesnt reach the kit. and the other bit you could jut get a bit of 'T' shaped piping i guess, might be ok
6. olly-bay Newbie Joined: Feb 2010 bedfordshire Posts: 15

   #6 1st March 2010, 15:13

   just get a new bit for the breather outlet someone one here will know the cheapest place new here so don't know myself and just search around on net for some silicon hose that can be cut to the lenth you need
   
   use the same link as above but look at VACUUM TUBING SILICONE HOSE
7. user_20080 Saxperience Hardcore! Joined: Dec 2007 smurfland. Posts: 17346 Ex saxo owner.

   #7 1st March 2010, 16:56

   Have a look in a motor factors/car spares shop at the different plastic pieces that are used in washer systems(T pieces etc).
   
   Steve.