406 master cylinder

1. quickpug L-plater Joined: Mar 2010 layland Posts: 49 106 quicksilver , saxo vtr 16v,

   #1 24th March 2010, 17:26

   does any1 no were i can buy a 406 master cylinder and which one will fit the sax . its for my 180 brake convershion
2. vtcarl Frequent Poster Joined: Dec 2006 telford, shropshire Posts: 968 E86 Z4 3.0 si coupe

   #2 24th March 2010, 20:58

   got mine off ebay new.
3. frankie Saxperience Addict Joined: Apr 2006 Frome, down deepest, darkest zummerset Posts: 12971 VTRallye

   #3 24th March 2010, 20:58

   scrappy...
4. quickpug L-plater Joined: Mar 2010 layland Posts: 49 106 quicksilver , saxo vtr 16v,

   #4 25th March 2010, 22:53

   i have a mate who works at genral traffic he got me a price of £40 all in for a new one . only prob is that the a choice of three without abs and a choise of two with abs but with four ports . wich one do i need
5. vtcarl Frequent Poster Joined: Dec 2006 telford, shropshire Posts: 968 E86 Z4 3.0 si coupe

   #5 26th March 2010, 10:23

   use the one without abs.
6. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

   #6 26th March 2010, 11:04

   Assuming that you havn't got ABS? In which case you'll need the 4 port one for non ABS 406 models which were mostly pre 1999.
   
   They should be 23.6mm or there abouts which will be stamped on the side
7. Steve Saxperience Hardcore! Joined: Mar 2005 Newcastle Upon Tyne Posts: 19910 CW Honda Integra DC5

   #7 26th March 2010, 11:31

   Quote:

   Originally Posted by willsy Assuming that you havn't got ABS? In which case you'll need the 4 port one for non ABS 406 models which were mostly pre 1999. They should be 23.6mm or there abouts which will be stamped on the side

   23.8mm
   
   The 3 that are listed for 406 v6
   
   ABS 2 x 12mm Outlets
   Pre 97 none abs 4 x 10mm outlets
   post 97 non abs 4 x 10mm outlets