How do I get the light out for mot purposes. I've changed the sensor but light is still on. I've now run out time for mot. Is there a fuse to take out to turn the light off for the mot
Abs light
-
#1
-
#2no. if the a.b.s. aint working the light stays on get a diag
on the prob rather than waste time money -
#3Don't have time to do diag I thought there was a way of getting rid of the light
-
#4Take the bulb out lol
-
#5do wot i did b4 seperate the clocks a bit of black insulate tape over the bit that the bulb shines threw some clocks are led bulbs and your unable to remove bulbs like on later phase 2 saxos
-
#6So there's no fuse that controls abs
-
#7hi mate,if the car is fitted with ABS it must be working,the light must also be working,the tester will check that,if the light isn't working its also a fail,but you could try using one of the above mothods for getting rid of the light,will just depend on whether or not the tester is on the ball.
-
#8So are the abs sensors all that can be causing the fault light
-
#9it will most likely be a sensor gone down but could also be the ABS pump,you'll need to get a diagnostic check done and it'll tell you exactly where the fault is.
-
#10Would it help if I said it was intermittent
-
#11check all your sensor connections/wires etc,could be a loose connection somewhere but a diagnostic check would tell you exactly where the fault is and would save you a lot of time.
-
#12Looks like I'll be paying for diag
-
#13should cost you around £30 mate
-
#14How much should I pay for an abs sensor
-
#15Also depends on how strict your mot guy is tbh
-
#16i get my diag tests for free lol if you have a garage you go to regular they might do it cheaper or for nothing some garages i've been to will do it for free if they know you will go to them to get the problem fixed
-
#17anyone got an idea
of price for abs sensor -
#18with this sort of problem id suggest getting it fixed properly tbh but the tape method usually fools the mot testers as it cant really be seen...
other option is to find out which wire does that light on the plugs and crimp in a bullet connector, that way it can be reconnected hassle free for MOT and he will NOT see a bullet connector hehe -
#19for abs sensor price go to 106parts.com! or use Ebay to search!
-
#20i just paid 70 quid for 1 from aep