Front Bumper Removal..

1. Jase125 Established Member Joined: Jan 2010 Wiltshire Posts: 1381 Pug 106, Saxo vtr

   #1 4th April 2010, 22:17

   Hi guys im just wondering if anyone could tell me how i remove the front bumper from my vtr? Thanks.
2. Lemmy92 Regular Poster Joined: Dec 2009 Essex, Southend-on-sea Posts: 381 BMW 318 IS

   #2 4th April 2010, 22:19

   You got two torx Screws(20 or 25 I think) one in each wheel arch and two 10 or 13mm bolts underneath those screws..then two bolts at the very front bottom holding it to the slam panel.
3. Jase125 Established Member Joined: Jan 2010 Wiltshire Posts: 1381 Pug 106, Saxo vtr

   #3 4th April 2010, 22:23

   thanks mate, where abouts are the 2 underneath the front? i dont have arch lining in so should be bit easier (Y)
4. Lemmy92 Regular Poster Joined: Dec 2009 Essex, Southend-on-sea Posts: 381 BMW 318 IS

   #4 4th April 2010, 22:24

   Two at the front..if you look under the front of the car you can't miss them
5. lewisvtrmk1 Infrequent Poster Joined: Jan 2010 suttone ely Posts: 161 1999 vtr black as and 1.6 si escort 3dr

   #5 4th April 2010, 22:27

   i had some little screw under the font part near where the radiator sits short job unless your rusted up on the slam panel and why you removing your bumper
6. Jase125 Established Member Joined: Jan 2010 Wiltshire Posts: 1381 Pug 106, Saxo vtr

   #6 5th April 2010, 12:54

   Im spraying the bump strip & im going to take it off to do it properly... did the back one yesterday
7. SAXLOWW L-plater Joined: Jan 2010 South Wales Posts: 43 Saxo VTR 02, Calibra C20 XE

   #7 7th September 2010, 18:51

   Fit 21"s that ought to get it off