angel eye problem :( help!!!

1. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

   #1 6th April 2010, 18:27

   hi there well this is ma angel eyes i fitted yesterday but i only seem to be able to get 1 halo working on each light with my side light but i want both halos on
   
   i have got the 2 red wires and put them together and them put the 2 black wires together and them put them on the right wires on the car but only 1 seems to be working as you can see any1 got any ideas of what i could do to sort this thanks
   
   
   gaz
2. citroen_saxo_vtr Saxperience Forum Bum Joined: Mar 2006 Norwich Posts: 2823 Vectra sri 2.6 v6

   #2 6th April 2010, 18:36

   I had this with mine, turned out the rings were dead so i just had the 2 middle ones on like yours.
3. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

   #3 6th April 2010, 19:07

   what you mean by dead lol the led had went on them? and if so do u not think it is weired that its the 2 of the same halos that dont work?
4. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

   #4 7th April 2010, 13:42

   any 1 ?
5. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

   #5 8th April 2010, 14:21

   bump
6. sqwidge Infrequent Poster Joined: Oct 2009 Grimsby Posts: 132 Citroen Saxo VTS

   #6 8th April 2010, 14:54

   there are two sets of wires per light, as in each ring has its own wires, have you hooked all 4 wires together?
7. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

   #7 9th April 2010, 23:01

   yes i have i put 2 red together and 2 black wires together and then put them on the wires on the car but still only got 1 halo???
   
   help
8. turbod_vtr Infrequent Poster Joined: Apr 2010 stockport Posts: 103 Mk2 Saxo vtrt, clio sport, megane 225

   #8 9th April 2010, 23:04

   do you not need to convert to different relay? i had to with moretts.
9. Humphreys L-plater Joined: Apr 2010 Southampton Posts: 50 Saxo 1.1i

   #9 9th April 2010, 23:26

   each light has two wires each,
   4 wires in totall
   when i re-wired mine i had black/white wires.
   
   one black and one white went into the old sidelight switch,
   take out the old light sidelights,
   find out which wire goes into what side of the old electrics, i think where you may of connected all the wires together into one switch they still need to be seperated into two different slots.
   eg, two wires to the right sidelight and two wirers to the left sidelight
   
   hope it helps.
10. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

    #10 10th April 2010, 15:49

    thats what i done i have a red wire and a black wire coming out of each halo so on the left side i got the 2 red put the together and then put the 2 black wires together wired them to the left sidelight wiring and then done the same with the right side but still only 1 halo its getting that bad i am thinking of just doing away with them all together what i dont want as i like them come on ppl any help would be great thanks gaz
11. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

    #11 11th April 2010, 08:12

    sorry just bumping it up as i still havent got to the bottom of this
12. saxovtsmad Saxperience Post Whore Joined: Aug 2008 stoke on trent Posts: 8875 now own a possi blue mk2 vts mk1 went to heaven

    #12 11th April 2010, 08:15

    is there a guide on here for them mate i had that problems with my H7's but got it sorted have you got a wire running off your battery ?
13. Noddy Saxperience Forum Bum Joined: Mar 2007 Maidstone, Kent Posts: 4121 Mk2 Posi Blue 1.1

    #13 11th April 2010, 08:17

    let me get this right, you've taken TWO red and TWO black from each side? there should be THREE red and black cables on each side - one for each ring and the other for the little LED in the top middle between the rings.
    
    In that photo you've got the inner ring and LED connected up and not the outer ring...
14. user_11357 Saxperience Forum Bum Joined: Aug 2006 Sunbury On Thames, Surrey Posts: 2593 I like Bikes now 👍🏻

    #14 11th April 2010, 12:23

    Quote:

    Originally Posted by Noddy let me get this right, you've taken TWO red and TWO black from each side? there should be THREE red and black cables on each side - one for each ring and the other for the little LED in the top middle between the rings. In that photo you've got the inner ring and LED connected up and not the outer ring...

    Was just about to point this out!
15. user_39785 Regular Poster Joined: Dec 2009 Alnwick Posts: 365 Mauritius Blue Mk2 VTR

    #15 11th April 2010, 18:11

    Forgive me if I'm wrong, but do you mean only one Halo works the dipped and main beam?
    Because my angels only use one for dipped and the other for headlight. And now I'm wondering if thats normal!
16. Humphreys L-plater Joined: Apr 2010 Southampton Posts: 50 Saxo 1.1i

    #16 11th April 2010, 19:49

    when my sidelights are on all four of my halos come on.
    you should be taking on red and one black from each side ?
17. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

    #17 12th April 2010, 08:17

    yes i have got the sidelight on inbetween the halos on each light haha but i still only get 1 halo working on each light when sidelights are on and yes i have got 3 red and 3 black if you count the little side light bulb so in that case i have got the 3 red wires together and conected to the wire on the car and the 3 black wires together and conected to the other wire on the car and its the same at the other end aswell but still only getting the 1 halo on each side do you get me haha
    
    gaz
18. Boosted Regular Poster Joined: May 2009 Malta Posts: 359 1.5D Saxo Mk1

    #18 12th April 2010, 08:27

    i think you can either have that much of a bad luck (i.e. both outer angel eyes dead) or having a bad setup of the wiring...i had a heart attack some time ago after i wired my angels up and seeing 1 not working...turned out to be a loose contact in my wiring
19. Noddy Saxperience Forum Bum Joined: Mar 2007 Maidstone, Kent Posts: 4121 Mk2 Posi Blue 1.1

    #19 12th April 2010, 10:53

    In that case try just connecting the outer rings to see if they come on then. If not then it may be the strange possibility that both outer rings are dead.
20. djgaz9 Frequent Poster Joined: Feb 2010 glasgow Posts: 739 SAXO VTR

    #20 12th April 2010, 18:59

    ok then well i will try it tomorrow and see if i conect just the outer rings up if it will work and if it dont then i think it is just my luck that both the outer rings went if it is the outer rings thats way what would i have to do to get them bk up n runing??
    
    take the light apart take the 2 little screws out that holds the halo in place take the halo out and then take the little led out and solder a new 1 in them??
    
    gaz