266mm Brake Upgrade, Will I Need To Upgrade MC? Braided Hoses??

  1. #1
    Basically bought some 206 gti 266mm brake calipers pads and discs and wondered if I will need to upgrade my mc?

    The brakes are going to be fitted on to a Mk1 VTS!

    All help will be thanked!

    Cheers!
  2. #2
    Its worth it, as it will take away some of the pedal travel

    You geting braided hoses aswell?
    1 user thanked this post:
  3. #3
    Im in the same boat but with 4pots.
    What Mc is the larger one to upgrade to? and do all the standard fittings attach straight into it?
    Im getting braided lines but just the ends on the front corners.

    sorry for the hijack.
  4. #4
    23mm is the upgrade can be picked up for around £30.00

    tbh personally dont see the point,i have 266mm brakes the pedal travel is not even that bad, good fluid, braided lines is fine, you can also adjust the 'pedal feel' using one of the guides in the how to section.
    1 user thanked this post:
  5. #5
    as above didn;t upgrade mine and its fine as standard travel. sure its up to personal preference on what your used to and what u want from it
    1 user thanked this post:
  6. #6
    Thanks lads!

    I want going to upgrade to braided lines, is it recommended? What's the advantages of braidedlines?
  7. #7
    The fittings are the same on all the peugeot calipers.
    So the standerd hoses will fit but can pull tight on full lock and or suspension travel which is dangerous and an mot fail
    braided lines improve the pedal feel,require less force to exert the same pressure on the disk
    1 user thanked this post:
  8. #8
    over good condition hoses I doubt anyone will notice a difference in braking but if your standard lines are old then the effects can be pronounced. The benefit is they are more resistant to damage and deterioration and obviously you can get them longer if needed.
    1 user thanked this post:
  9. #9
    Ive just fitted 266mm brakes on my furio and the pedal travel is the same as it was with my standard brakes. Although i do need all 4 brakes bleeding which i will do tonight.
    1 user thanked this post:
  10. #10
    master cylinder upgrade isnt necessary, but is a worthwhile upgrade in my experience
  11. #11
    yeah you dont really NEED to do either of them mods, i would get braided hoses for sure while the old hoses are half off.
    mc is personal preference.
    i havent done mine but might in future.
  12. #12
    cheers lads.

    all thanked.
  13. #13
    hi how much did that kit cost you?im looking for the same to fit with my standard 14" vtr alloys sorry for changing subject abit