push start button

1. megslad Regular Poster Joined: Feb 2009 Llanrwst Posts: 320 VTS mk2 Blue (Track) VTR mk2 Gold Y107BCW

   #1 10th July 2010, 15:23

   I know theres a thread for this but in that thread they are using a relay.
   All I want is the colour of a feed wire into my switch and output.
   So i can wire it without any need for relays
   
   Thanks
2. Stevo123 Established Member Joined: Apr 2009 Redcar Posts: 1971 2000 Posi Blue vtr

   #2 10th July 2010, 16:19

   The relay is there to handle a higher current than your swith will/will not handle that's all.
   
   Use a multimeter and find the wire on the ignition that gose +12 when the key is fully turned round into the starting position. Then need to link the feed to ignition to this wire with your switch (or relay) in the middle of it.
   
   standard:
   ign feed--------[ign barrell switch]---------to starter motor solenoid
   
   what you want:
   ign feed--------[your switch]--------------to starter motor solenoid
3. megslad Regular Poster Joined: Feb 2009 Llanrwst Posts: 320 VTS mk2 Blue (Track) VTR mk2 Gold Y107BCW

   #3 10th July 2010, 17:54

   ta thats what i wanted to know, ill go for the relay then jst in case