Lowering???

1. simon123 Infrequent Poster Joined: Jul 2010 Carmarthen, West Wales Posts: 128 2000 'W' Citroen Saxo Furio

   #1 25th July 2010, 16:02

   Hi,
   
   Just wondering what i would need to lower the front end of my furio???
   Would i need new springs???
   
   I dont want to lower it too much only about 30mm
2. user_34323 Saxperience Post Whore Joined: May 2009 ringwood Posts: 6305 suzuki swift 1.2 sz3

   #2 25th July 2010, 16:05

   just springs mate if you wanna go 30mm
3. 3cott Saxperience Forum Bum Joined: Mar 2008 Rotherham Posts: 4614 Black mk2 vts

   #3 25th July 2010, 16:12

   You only need the springs
4. simon123 Infrequent Poster Joined: Jul 2010 Carmarthen, West Wales Posts: 128 2000 'W' Citroen Saxo Furio

   #4 25th July 2010, 16:13

   Does anybody have a link for good springs.
5. willsy West Midlands Joined: Nov 2005 Nuneaton (West Mids) Posts: 13835 '64 Volvo V40 R’Design, '89 Ph1 309 GTi, ‘97 Mk1 S

   #5 25th July 2010, 17:18

   Simon,
   
   If you just want to lower 30mm then just springs for the front with existing torsion bars lowered on the rear is fine. Springs alone will cost about £50
   
   However even though its widely accepted that standard dampers will be ok up to 40mm lowering if you have the budget available id always recommend upgrading them too, it is well worth the extra cost.
   
   If you have a look on www.kamracing.co.uk they have a good selection of both springs and full lowering kits.
   
   For around 30mm lowering have a look at the Apex ones.
6. couttsyboy Frequent Poster Joined: Feb 2010 Chippenham, Wiltshire Posts: 667 Silver Mk1 VTR 16v S1 Rallye 8v

   #6 26th July 2010, 10:36

   springs, apex or spax
7. LSOfreak Saxperience Addict Joined: Jan 2008 west london Posts: 13810

   #7 26th July 2010, 11:28

   or the eibach pro springs. work really well with standard dampers as they have the same poundage rate or something