Guide to remove the whole dash?

1. crustyclown777 Frequent Poster Joined: Apr 2009 Gloucester Posts: 647 saxo mk2 vtr

   #1 30th August 2010, 14:59

   As above, had a look at stickies and searched, is there anything?
   
   Cheers
2. Saxo-Guy Regular Poster Joined: Dec 2009 Posts: 477

   #2 30th August 2010, 15:03

   I found a few threads where people mentioned where some bolts were but i couldnt find a guide when i did mine mate. Theres quite a few bolts on the scuttle pannel underneath the wiper motor. Then one on each side inside near the doors at the bottom of the dash. I think theres also a few more but there the only ones i can remember mate sorry !
3. blackie_2k5 Saxperience Hardcore! Joined: Oct 2008 Birtley Posts: 22253 VTR Turbo, 106 xsi track slag, Transit recovery, B

   #3 30th August 2010, 15:29

   its easy, start around the clocks and centre console, im pretty sure theres a guid for the 106 on here somewhere, basically the same, as mentioned theres a few under the scuttle which are annoying to say the least, wipers etc off
4. Le0N Infrequent Poster Joined: Mar 2010 lincs Posts: 203 VT kitted 1.1

   #4 30th August 2010, 16:43

   there is some torq screws behind the ashtray that people frequently forget about!!
5. Mochachino Saxperience Hardcore! Joined: Nov 2007 Guantanamo Bay Posts: 28700 oyster card

   #5 30th August 2010, 17:00

   Undo the Inside out torq nuts on the scuttle and remove it.
   
   Undo the 10 or 13mm nuts that you can see in the scuttle tray.
   
   Undo the Bolts, one at each side of the dash near the earths near the doors.
   
   Undo the Bolt in the middle under the center console.
   
   Undo the torq's holding the center console in and remove the plugs.
   
   Undo the torq bolt holding the heater in.
   
   Undo steering wheel, dials etc with torq keys.
   
   Undo 3 13mm bolts on the steering column.
   
   Undo the two loom plugs under the glovebox.
   
   Go mental pulling it out.
6. quikpug0121 L-plater Joined: Jul 2008 wilts Posts: 63 106 quiksilver

   #6 30th August 2010, 19:19

   sweet cheers mate
7. crustyclown777 Frequent Poster Joined: Apr 2009 Gloucester Posts: 647 saxo mk2 vtr

   #7 30th August 2010, 20:37

   Cheers guys.
8. user_39821 Saxperience Forum Bum Joined: Dec 2009 Uckfield, East Sussex Posts: 3362 Citroen saxo 1.4 furio

   #8 30th August 2010, 23:25

   Haynes manual has everything you will need. wise buy