lowering by 50-60mm

1. user_46471 Infrequent Poster Joined: Aug 2010 burton on trent Posts: 239 v plate vtr silver

   #1 6th September 2010, 16:30

   i want to lower my vtr between 50-60mm
   new shocks and springs for the front but the rear set up is new to me
   can it be done just by adjusting the beam or am i better off getting shocks and springs
2. djadzvtr Frequent Poster Joined: May 2009 Doncaster Posts: 749 vtr - 16v conversion y0!

   #2 6th September 2010, 16:41

   Quote:

   Originally Posted by carl300367 i want to lower my vtr between 50-60mm new shocks and springs for the front but the rear set up is new to me can it be done just by adjusting the beam or am i better off getting shocks and springs

   the tosion bar would need adjusting....that is all
3. user_46471 Infrequent Poster Joined: Aug 2010 burton on trent Posts: 239 v plate vtr silver

   #3 6th September 2010, 16:42

   so the origonal springs and shocks will be ok then
   
   ta very much
   
   any links to a good supplier ?
4. ryza Frequent Poster Joined: May 2010 ipswich Posts: 961 track saxo Daily beemer

   #4 6th September 2010, 16:47

   you'd want uprated rear dampers most likely mate
5. Chris_O Saxperience Forum Bum Joined: Mar 2007 Kent Posts: 4175 RB25'd s14a + 2008 MWB Transit

   #5 6th September 2010, 21:52

   There's no springs on the back of the car, just torsion bars which need to be adjusted in order to lower the rear. And as said it would be beneficial to uprate the shocks