vtr alloys on flatarch

  1. #1
    going to pick some vtrs up today and just wondering will they fit my flatarch properly like without spacers ? thanks
  2. #2
    No spacers needed, shouldn't rub unless you are lowered but if it does rub then it will be on the arch.
  3. #3
    They gunnnnnnnna slow you down more so.
  4. #4
    They will fit fine without spacers mate, but may rub on the rear arches if your car is lowered. You maye have to cut/bend the arch away from the wheel if lowered.
  5. #5
    From personal experience, the only times you're likely to get rubbing on the rear is if you've either lowered the rear or have more than 1 person in the back. Either way, all you need to do is take a hammer to the little lip that is just on the top edge of the arch and knock/bend it up and out of the way. Problem sorted. You won't have any problems with rubbing on the inside of the arch nor will you have problems with rubbing when lowered on the front.

    I'm down -45 on the front and the rear arch sits about an inch over the top of the tyre and i don't get any rubbing at all.
  6. #6
    is your flatarch a 3 stud though. cuz if so they wont fit, obviously
  7. #7
    Quote:
    Originally Posted by RachBabyX View Post
    is your flatarch a 3 stud though. cuz if so they wont fit, obviously
    Quote:
    Car(s): CITROEN SAXO FORTE 1.1 02 SILVER
    ^^^^^^
    1 user thanked this post:
  8. #8
    love it ^^^^^^
  9. #9
    hahaha ^^^ yeh cheers people they fit sound without no probs and they look fuckin sweet! shout out to mark (sparky26) for sortin me out with them!
    1 user thanked this post: