I know most of you are all have this problem as 70% of saxos I see have a problem with the door not being flush with the B piller/Rear bumpstripe
Simplest thing to do and takes 2 mins to do
Open your door
The door catch is on the B pillar (next to back of seat)
Loosen off the 2 Torx screws a LITTLE and push the catch back as far as you need it
Tighten up the 2 Torx screws, and close door gently to see if it catches
Job done
and no more gap between your doors
Simplest thing to do and takes 2 mins to do
Open your door
The door catch is on the B pillar (next to back of seat)
Loosen off the 2 Torx screws a LITTLE and push the catch back as far as you need it
Tighten up the 2 Torx screws, and close door gently to see if it catches
Job done
and no more gap between your doors