Radiator!

  1. #1
    Right was replacing my manifold last night and caught part of it on the rad so it started pissing out coolant..

    Is Radweld a good temporary measure and is the best way to apply it through the rad hose as the cap might cause air locks, just need some opinions?!

    Thanks
  2. #2
    Depends how big the hole is. Worth a go, but for peice of mind you can get another rad cheap enough. Rad cap will be fine.
  3. #3
    Its not very big, how much is a rad you reckon?
  4. #4
    Im on my phone atm. Just check ebay or 106parts. Id guess £45ish
  5. #5
    Ok mate, thanks i believe i have a VTS rad which is 530mm instead of the VTR's 390mm?

    Is that correct?
  6. #6
    Vts or mk2 vtr rad will be a direct replacment.
  7. #7
    Be careful of rad weld it can block up the heater matrix.

    Steve.
  8. #8
    Quote:
    Originally Posted by stevo67 View Post
    Be careful of rad weld it can block up the heater matrix.

    Steve.
    How do you mean mate?
  9. #9
    On the below page, is the top one VTR and the bottom one VTS..

    http://www1.fastrads.co.uk/radiators...ate/index.html
  10. #10
    Pleassseee? :d
  11. #11
    just get a new rad, then you know you dont ever have to worry about it leaking on long journeys etc
  12. #12
    I am trying but i need to find out which is the correct as above!
  13. #13
    Quote:
    Originally Posted by Tringaling View Post
    How do you mean mate?
    he means it can bung the matrix up and you'll have no heat
  14. #14
    What if this happens?
  15. #15
    i've just explained you'll get no heat, what happens is you have to wear more clothes when you're driving lol
    1 user thanked this post:
  16. #16
    my heater matrix leaked so i used rad weld to sort it and after i done that my heaters hardly go hot only warm- so in the process of replacing the matrix now
  17. #17
    Quote:
    Originally Posted by mandyslover70 View Post
    i've just explained you'll get no heat, what happens is you have to wear more clothes when you're driving lol
    Thats what i meant, you read it wrong YO!

    I will try the rad weld and when i get money buy a rad! FML..
  18. #18
    It is just overheating now, hopefully i will just need to add more coolant..
  19. #19
    i did the exact same thing as you mate i udes rad weld it held for 5 mins lol ... buy a new rad i bought one from budget radiators on ebay very good service good quailty rads too mines still goin strong ...
  20. #20
    Im not sure if the leak is gone as there is no coolant though?!
    Might run some water through it see what happens..

    I am getting a £15 VTS rad and replacing it tonight, might get rid of my air lock too!