Raceland Induction

1. user_20683 Saxperience Forum Bum Joined: Jan 2008 Woolwich Barracks Posts: 3921 52 Plate Black 8v R'

   #1 30th November 2010, 17:05

   Right, bought one of Andiz on here..
   
   I have a MK2 VTR
   
   The 90 degree pipe has the hole for the breather to go in i believe but the 2 dont go into each other, can i get a replacement to make them fit or what shall i do?!
   
   Cheers
2. Bedford126 Saxperience Post Whore Joined: Jul 2010 Morley, Leeds Posts: 8469 Civic ep3 type r powered by TDI NORTH

   #2 30th November 2010, 17:13

   you need to cut the hose from the clip on part that clips onto the rocker cover and replace the hose with a silicone hose and dont bother with the clip on part on the raceland not really needed.
3. user_31916 L-plater Joined: Mar 2009 North Yorkshire Posts: 62 Saxo VTR 2003

   #3 30th November 2010, 17:14

   There should be a bit of plastic that connects the breather to the hole, was a bit of a shit fit on mine though.
4. Bedford126 Saxperience Post Whore Joined: Jul 2010 Morley, Leeds Posts: 8469 Civic ep3 type r powered by TDI NORTH

   #4 30th November 2010, 17:19

   ohh you mean the plastic L piece you can get them from b&q for pond pumps that's where i got mine and it fits better than the black ones that are supplied.
5. user_20683 Saxperience Forum Bum Joined: Jan 2008 Woolwich Barracks Posts: 3921 52 Plate Black 8v R'

   #5 30th November 2010, 17:54

   Its the straight part of the 90 degree
6. marcusd Saxperience Post Whore Joined: Jan 2009 warrington Posts: 7551 posi blue mk2 2003 vtr

   #6 30th November 2010, 21:15

   i sawed mine in half so it became a straight piece, then put it in the end of pipe and taped it up with gaffer tape then black electrical tape. works well even if it is a bodge job.
   but eventually i will replace with silicone hose
7. user_20683 Saxperience Forum Bum Joined: Jan 2008 Woolwich Barracks Posts: 3921 52 Plate Black 8v R'

   #7 30th November 2010, 23:11

   Where can i get these silicone hoses?
8. marcusd Saxperience Post Whore Joined: Jan 2009 warrington Posts: 7551 posi blue mk2 2003 vtr

   #8 1st December 2010, 10:27

   ebay will be cheapest.
9. user_20683 Saxperience Forum Bum Joined: Jan 2008 Woolwich Barracks Posts: 3921 52 Plate Black 8v R'

   #9 1st December 2010, 10:42

   Sounds dumb but what shall i type in? LOL
10. marcusd Saxperience Post Whore Joined: Jan 2009 warrington Posts: 7551 posi blue mk2 2003 vtr

    #10 1st December 2010, 11:06

    silicone hose. or search for 90 degree bends silicone hoses and search thro the shops its how i found some
11. Pearson Established Member Joined: Sep 2009 Doncaster. Posts: 2115 Y' Reg MK2 1.6i VTR

    #11 1st December 2010, 11:09

    I used a large rubber grommet filled the whole on the silver funnel, saw the hose off from the oil breather pipe then bought a breather filter off Ebay for like 3 quid and put that on, worked fine ever since and sounds decent.
12. user_20683 Saxperience Forum Bum Joined: Jan 2008 Woolwich Barracks Posts: 3921 52 Plate Black 8v R'

    #12 1st December 2010, 12:03

    What MM is it etc
13. marcusd Saxperience Post Whore Joined: Jan 2009 warrington Posts: 7551 posi blue mk2 2003 vtr

    #13 1st December 2010, 14:19

    will need to measure but i think internal 16mm-19mm