Rear seatbelts

18th January 2011, 18:16

Went to put my rear belts back in at the weekend, and when i took them out they obviously wound themselves back on to the inertia reel. Now I can't pull them out at all and are stuck! Am I missing something really obvious? I took one of them apart and now it's fucked lol

18th January 2011, 18:19

Do a search mate I think someones covered this in another post.

Steve.

18th January 2011, 18:27

Yeh I searched and found this, but it's not working,so if anyones got any other ideas would be much appreciated!

http://www.saxperience.com/forum/sho...rear+seatbelts

18th January 2011, 19:27

The ball bearing will be pushing the pin into the cog.

Take one side of the black plastic off, irc its the side with an M or L on? I cant remember now.

but basically, push the tiny lil plastic pins so that the case can be removed, now do it very gently so you can peek inside...if you see a white cog continue to take it off (if you see a copper coloured metal real put the case back on and push the pins back on or the real will come flying off and you will have a hard job sorting it out)....On the white cog side, youll see a case with a ball bearing inside, remove this. Reel all the belt out and replace the bearing and casing if you wish, or leave it off. Reassemble, jobs a gooden.

18th January 2011, 19:30

ok cheers mate ill give this a go with the other. I did take one of them apart and managed to get the belt out, but i got impatient and now it's completely fucked, all the bits fell out everywhere lol. But I know vaugely what you mean about the ball bearing and stuff so ill have a look, cheers

18th January 2011, 19:32

I might have an old belt and mech in the shed. Give us a shout if you need any pics and il see if i can find any