Intermediate driveshaft bearing

1. thomson_adam Newbie Joined: Sep 2010 Posts: 21

   #1 22nd January 2011, 17:00

   here goes .... i have decided to take on the task of putting a new clutch on my mk2 vtr anyhow got the passenger shaft out no problem as i have just changed it but i seem to be stuck on the drivers side. i have roated the 11mm
   and should just be able to pull the shaft away but it is stuck quite good. its dark now so i have come in to see if i can get any advice from here. is it a matter of putting a chissle in and trying to slack it off or do i have to have the shaft perfectly straight when pulling it away
2. madmattracing Infrequent Poster Joined: Sep 2008 Posts: 118

   #2 22nd January 2011, 17:04

   ive had this problem,i used a lever just by the bearing carrier to ease the bearing out
3. madmattracing Infrequent Poster Joined: Sep 2008 Posts: 118

   #3 22nd January 2011, 17:07

   " i have roated the 11mm"
   does this mean uve undone both 11mm bolts that hold the bearing in place
4. thomson_adam Newbie Joined: Sep 2010 Posts: 21

   #4 22nd January 2011, 23:36

   Quote:

   Originally Posted by madmattracing " i have roated the 11mm" does this mean uve undone both 11mm bolts that hold the bearing in place

   
   sorry mate... yeah i have undone both of them then rotated them round. i will try split it tomorrow. have you done the clutch to