Carpet edge by door seal prob

  1. #1
    Since i purchased my cars a few years back i noticed that the carpet was not fitted properly , where the carpet edge to door sill ( weather seal ) meet's ! well there is a gap and you can see the metal ( in my case the blue paint ) , doe's anyone know how this was kept in place ? , i did think about using glue but if i ever need to remove the carpet it will be a bugger to get back out .
    cheers all
  2. #2
    Quote:
    Originally Posted by nuttysaxo View Post
    Since i purchased my cars a few years back i noticed that the carpet was not fitted properly , where the carpet edge to door sill ( weather seal ) meet's ! well there is a gap and you can see the metal ( in my case the blue paint ) , doe's anyone know how this was kept in place ? , i did think about using glue but if i ever need to remove the carpet it will be a bugger to get back out .
    cheers all
    they not held in place with anything mate the best bet is to use double sided velcro then u can take it out easily if needed i just glued my black one in.
    1 user thanked this post:
  3. #3
    Mine is held in place by little metal clips which slot down on the sill joint and clamp into the carpet. About 6 all the way round the door.
  4. #4
    Quote:
    Originally Posted by seisporting View Post
    Mine is held in place by little metal clips which slot down on the sill joint and clamp into the carpet. About 6 all the way round the door.
    Cheers for that , these clips do you know where i could get them from mate ?
    ta :0)
  5. #5
    Citroen or Scrapyards.
    Nothing on ebay i just looked for you.
  6. #6
    Quote:
    Originally Posted by seisporting View Post
    Citroen or Scrapyards.
    Nothing on ebay i just looked for you.
    Thankyou for that mate :0)