Important! : Kam Racing gear linkages too long!

1. tommy_g666 Regular Poster Joined: Jun 2009 Leicester Posts: 486 MK2 VTRS Traxo!

   #1 16th April 2011, 20:18

   I've just got some kam racing gear linkages. I've managed too fit the long one as that was the same size but the 2 shorter ones are longer. The upper out of the 2 will fit just but it makes the shift stain as its abit too long. The lower one is way out. The standard small linkages on mine have been welded either too make them shorter or to repair them if they snapped. The standard rods are pretty old and bent so i don't know
   
   Has anyone else had this problem????
2. Krys_23 Saxperience Post Whore Joined: Aug 2007 Posts: 6543

   #2 16th April 2011, 20:38

   Arent these adjustable with a 10mil spanner?
3. user_36198 Saxperience Post Whore Joined: Aug 2009 ilkeston derbyshire Posts: 9823 C2 VTR stripped, 406hdi, clio 172

   #3 16th April 2011, 20:42

   it'd help tommy out if someone had the measurement for a set of standard rods to hand, that way he can have a measure and compare, know he'd tried adjusting them already
4. tommy_g666 Regular Poster Joined: Jun 2009 Leicester Posts: 486 MK2 VTRS Traxo!

   #4 16th April 2011, 20:50

   Yer even with the adjusted as far as they will go there still way out.
   
   The kam ones measure 185mm from the centre cup - cup.
5. user_36198 Saxperience Post Whore Joined: Aug 2009 ilkeston derbyshire Posts: 9823 C2 VTR stripped, 406hdi, clio 172

   #5 16th April 2011, 21:03

   just looked on fleabay, someone on there has shorter rods and he's measured them at 205mm