sensors and stuff/ gsxr 600 throttle bodies

1. citroenaxgtr Frequent Poster Joined: Jan 2006 swansea United Kingdom (Wales) Posts: 895 citroen ax vtr

   #1 3rd July 2006, 01:20

   im buying some throttle bodies from a gsxr 600 next week and was wodering, where do i put the map sensor, air intake temp sensor and any other bits..i.e fuel pressure regulator..i will be running this on a megasquirt 2..
   also is it possible to run wasted spark system on ms2 and how is it done/..
   cheers jamie.
2. Ratty Established Member Joined: Jun 2003 United Kingdom (England) Posts: 1682

   #2 3rd July 2006, 09:27

   put them where ever you want, map sensor just needs a feed off the vacuum pipe and air temp sensor assuming your having an airbox you can put anywhere on the box or inlet tract, or if your not, again you can use one of the vacuum feeds.
   
   yes its possible, thats exactly how carbs idle.
3. citroenaxgtr Frequent Poster Joined: Jan 2006 swansea United Kingdom (Wales) Posts: 895 citroen ax vtr

   #3 4th July 2006, 01:10

   right. so do i have the vacuum pipe coming from each t/b and joining into one pipe or does the map come from one of the t/b`s.. my guess is to tap from all of them,, and can i use any old map sensor.. i have a magnetti marelli one from an ax.. would that work/.
4. Ratty Established Member Joined: Jun 2003 United Kingdom (England) Posts: 1682

   #4 4th July 2006, 10:16

   they should all be together then you can t-piece and tap the map.