Rubber mount on exhaust

25th July 2011, 01:37

so i think its the middle rubber mount like mid way up the exhaust has broke, someone changed the whole enhaust and left the old mounts in by looks of it(cheap or what!) ordered 1 off ebay for £3 are they easy enough to change?

25th July 2011, 01:38

shouldnt see why not, slip old them off and slip new ones on?

25th July 2011, 01:49

does that mean i have to disconnect exhaust at some point to put it round don't have a clue as you can probably tell ha cheers

25th July 2011, 02:30

im guessing your on about a rubber mount on the straight through pipe?... im not too sure with this as my saxo hasnt got one, i dont think

lol,

but im guessing if it wont come off any other way then yeah you'll probably have to disconnect the pipe somewhere, rather than disconnecting the backbox, would it come off the otherside? by disconnecting it off the cat/mani?

25th July 2011, 19:20

Nar you dont have to take the exhust off, only thing you need to make sure it that the handbrake is OFF (wheels chocked obviously) because the cable runs right by the hanger, and its a stuggle to get the rubber off if the cable is tight, other than that is slide on slide off, if your having trouble getting the on and off, just squirt them with WD-40 to lube them up

x

25th July 2011, 19:23

Dont use wd40 on them it eats rubber so will be shagged in 6 months if you so either use grease or silicone spray. or even washing up liquid

25th July 2011, 19:27

If it needs a lil bit of lube then fairy is pretty good just dont use too much. But pretty much any one can fit them mate.

26th July 2011, 00:36

cheers fellas