Would a citroen xantia steering wheel fit a saxo?

  1. #1
    The steering wheel looks something like this


    I do not mind how it will look but will it fit?
  2. #2
    Anyone?
  3. #3
    Why would you want to do that :| :|
    1 user thanked this post:
  4. #4
    Quote:
    Originally Posted by saxo_singh View Post
    Why would you want to do that :| :|
    + 1.

    keep the standard wheel.
  5. #5
    Because I know someone with a xantia lying around and i just need a steering wheel for the mot. It will be coming off again after the mot and putting back on the momo.
  6. #6
    I'm pretty sure it won't fit. Buy a saxo steering wheel, they go for pennies these days
  7. #7
    go scrap yard get cheep saxo wheel or keep an eye on ebay. whats the reason in needing one for mot? whats wrong with the one you are using?
  8. #8
    Have one here you can have for £10 with the airbag, or £15 posted.
  9. #9
    I have a momo steering wheel without the airbag but the airbag light is turned off on the dash. Will I have to get a proper steering wheel with airbag or would they pass it cause there is no airbag light on the dash?
  10. #10
    Quote:
    Originally Posted by kev250 View Post
    I have a momo steering wheel without the airbag but the airbag light is turned off on the dash. Will I have to get a proper steering wheel with airbag or would they pass it cause there is no airbag light on the dash?
    Won`t matter at all my last 2 mot`s have passed with tape over the light,i`ve removed the bulb now.

    Steve.
  11. #11
    Im in ireland tho.

    I found out that they fail it unless the airbag comes on with the ignition and goes off so looks like i am going to have to sort out the light, hopefully the bulb is just taken out and wont have to get a diagnostic kit on it.
  12. #12
    just put a 3ohm resistor in where you plug into the airbaig, will turn that light off
  13. #13
    My light is off! I want to put it back on!

    Is there much work to get to the airbag light to check if the bulb has been taken out, do i have to take out the whole dash?